G.A.S Digital EC Fan Cables
  • Cable pack  8
  • 11
  • 3
  • 133356   gas uk 5m male to male cable
  • 4
  • 5
  • 7
  • 8
  • 9
  • 10
  • 8

G.A.S Digital EC Fan Cables

SKU:

Choose your cable:

5m Non-Active Male to Male (Pack 2) (Add: £4.00)

£7.95 £7.95
G.A.S Digital EC Fan Cables
  • Cable pack  8
  • 11
  • 3
  • 133356   gas uk 5m male to male cable
  • 4
  • 5
  • 7
  • 8
  • 9
  • 10
  • 8

Everything Needed to Set Up Digital Fans and Controllers

We offer a comprehensive range of cables that will enable you to set up your digital extraction system exactly how you want it, no matter what the layout.

  • Allows you to thermostatically control your fan equipment
  • Used to get the best from Vector ECs and Hyper Fans
  • Allows you to tailor your digital extraction system to suit your exact needs
  • High-quality, long lasting cables
  • Check out the One Stop Blog for info on cabling set-ups

Contains

1 x cable pack. Choose the type using the dropdown menu.

How GAS Cables Work

Note that all fans and fan controllers come with female connectors. That's why most controller cables terminate with male ends. 

Active and Non-Active Cables - What's the Difference?

Quite simply, non-active cables only move data, whereas active cables also move power. Controllers like the EC1 don't have mains plugs and are instead powered via the fan, so they require active cables.

Non-active cables can only be used with fan controllers that are powered from the mains, whereas active cables can be used in almost any situation, even if the fan controller already has its own power. The only exception to this is the Digital EC Fan Controller and Balancer - always use this unit with non-active cables.

5m Non-Active Male to Male (Pack 2)

Can be used to connect digital fans (Vector ECs or Hyper Fans) directly to fan speed controllers. If you need to connect two fans to the same controller socket, use two of these cables and an Active Splitter (below).

Non-Active Y-Splitter (Pack 3)

Used with Male to Male cables to control two fans from the same fan speed controller socket. Comes with one male connector and two female connectors. Use the male connector to link up with the controller, and use the two female connectors to link up to the Male to Male cables.

2m Balancer Extension (Pack 4)

Connects the Digital EC Fan Controller to its Balancer unit.

5m Non-Active 2-Pin to 3-Pin Hyper Fan Cable (Pack 5)

Used to connect older Hyper Fan models to newer fan controllers. Users of Hyper Fans made within the last few years need not worry about this.

2m Non-Active Female to Female Extension (Pack 7)

Used to lengthen cabling by sitting inbetween two ‘Non-Active Male to Male’ cables.

5m Active Male to Male (Pack 8)

Used to connect digital fans (Vector ECs or Hyper Fans) directly to fan speed controllers. If you need to connect two fans to the same controller socket, use two of these cables and an Active Splitter (below).

Active Y-Splitter (Pack 9)

Used with Male to Male cables to control two fans from the same fan speed controller socket. Comes with one male connector and two female connectors. Use the male connector to link up with the controller, and use the two female connectors to link up to the Male to Male cables.

Gavita EL1 / EL2F Cable (Pack 10)

The Gavita EL1F and EL2F are lighting controllers that also power digital fans. This cable connects to the port on the EL1F or EL2F and terminates with a male connector, which is used to connect to your fan.

Want to use two fans? Then you'll also need a Female to Female Extension, a Y-Splitter and two sets of 5m Male to Male cables.

Active Female to Female Extension (Pack 11)

Used to lengthen cabling by sitting inbetween two ‘Active Male to Male’ cables.

Look for similar items