Quest 70 Overhead Dehumidifier
Military-Grade Dehumidifiers that Help to Maintain a Perfect Environment, Accelerating Growth Rates and Eliminating Mildew and Rot
If your plants are suffering from high humidity levels, then running a Quest Dehumidifier is the answer to your problems. High humidity can destroy entire crops by slowing down growth rates and encouraging mould and mildew. Quest dehumidifiers solve this issue by sucking enormous volumes of water from the air reliably and effectively, whenever they're needed. They're built to specifications that make them a favourite across numerous industries and government organisations, including the military. Quest dehumidifiers are even trusted for use onboard naval destroyers! Buy one of these pieces of kit and rest assured that you've chosen wisely.
For more info on humidity in your grow room, visit the One Stop Blog.
- Capable of removing a massive 26 litres of water per day from the air!
- Designed to be mounted at the top of the grow area (can be hung on chains)
- Compact size - only 54cm tall
- Economical on power – shifts 2.2 litres per KWH
- Proudly designed and manufactured in the USA
- Rugged and dependable, with a premium build-quality
- Tested in the most extreme situations – used by major industries and military applications
- Teams up nicely with the Dimlux Maxi Controller or the G.A.S. Enviro Controller
- Utilises gravity to send water directly to your nutrient tank (or to a drain)
- Works on a standard single phase mains supply (and comes with a 3-pin plug)
- Can be converted to be used outside of the room that it's situated in (using ducting and fittings)
1 x Quest 70 dehumidifier, 1 x power cable with IEC connector and 3-pin plug, 1 x length of pipe (for draining water to your reservoir tank or drain)
How the Quest 70 Works:
Getting your environmental parameters within optimal ranges is the key to successful growing. Relative humidity plays a huge role in dictating the growth rates of your plants. When humidity levels are too low, the rate of transpiration increases, causing the plant to lose too much water. Likewise, when humidity levels are too high, growth rates slow down dramatically, and the door is also opened up to an array of moisture-related issues, like powdery mildew and botrytis (rot). As plants reach their later stages, they can put a lot of water vapour into the surrounding atmosphere. Much of this vapour will leave the room via your extraction system, but if humidity levels in the room are still too high, then you're going to need some extra help...
The Quest 70 is capable of removing water from the air at a rate of 26 litres per day. The 70 is designed to be mounted at the top of the grow room, above head height. It's compact at 31cm x 31cm x 54cm and lightweight enough to hang using chains at 25kg. It features a built-in humidistat, allowing it to adapt to the conditions in the room automatically. Just set the dial to your chosen mositure level and you're away. Alternatively, see below for info on pairing it up with a separate controller, which will give you even more functionality, allowing you to select humidity levels for both daytime and night-time.
Quest dehumidifiers are quality products that are built to last. But don't just take our word for it... Take note of the fact that they are used in some of the most testing situations out there: on naval vessels, in laboratories, at swimming pools, and even breweries.
How to Use the Quest 70:
Set-up for this unit is quick and easy. All you need to do is plug it into a wall socket. Quest dehumidifiers come with power cables fitted with 3-pin plugs, so you're good to go.
The Quest 70 comes with a length of pipe and a connector which needs to be attached to the water outlet point. Just put the other end of the pipe wherever you want to send the water, whether it be to your tank or down the drain.
You'll notice a dial on the front of the unit. This dial allows you to select the level of moisture that you require in the room. The built-in humidistat then switches the dehumdifier on and off to main your chosen climate. It couldn't get any simpler!
The Quest 70 also pairs up nicely with high-end controllers like the Dimlux Maxi Controller and the G.A.S. Enviro Controller. Both systems are able to detect moisture levels in the air via humidity sensors. All you need to do is plug the it into the socket on your controller and consult the manual for information on programming it correctly. If moisture levels go above your ideal daytime or night-time setting, your controller will switch on dehumidifying equipment as needed. This beats using the built-in humidistat because you get to choose different settings for different times of the day instead of a single overall setting. Don't forget that, if you do decide to use it with a Maxi Controller, you'll also need the separately available humidity probe and Aux Box unit.
Max dehumidification level: 26 litres per day
Efficiency: 2.2 litres per KWH
Dimensions: (l)31cm x (w)31cm x (h)54cm