How to Use Dutch Pro - Auto Flowering Bloom - Hydro/Coco A&B - Hard Water
Fill your Coco feed water container or hydroponics reservoir with water and add equal amounts of Dutch Pro Auto Flowering Bloom for Hydro/Coco Part A and Dutch Pro Auto Flowering Bloom for Hydro/Coco Part B to the container to achieve the required strength and mix well. Dutch Pro recommend a dosage of 2.5 to 3.5 ml/Litre of both part A and part B. Dutch Pro recommend using a syringe or beaker for accurate measurement of this product and a CF/EC/PPM meter such as the Bluelab Truncheon to check the TDS. Adjust as necessary. Next, add any additives and boosters you wish to use and again mix well. Adjust the pH of the solution to the required level using pH up or down as necessary. Dutch Pro suggest an optimum pH of 5.8 for best results. We recommend the use of a pH meter such as the Horticare pH meter to help accurately set the pH to the required level.
Both parts of a 2-part nutrient are designed to be used together in equal amounts. Using only part A or part B, or using them in unequal amounts will result in a nutrient solution which is not properly balanced. This will almost certainly lead to your plants suffering from deficiencies.
As with all nutrients, boosters and additives, never mix them together in their concentrated form (i.e. straight out of the bottle). Always add each nutrient, booster or additive to your reservoir or feed water in turn, giving the solution a good stir to mix it in before adding the next one.
Dutch Pro - Auto Flowering Bloom - Hydro/Coco A&B - Hard Water recommended dosage: 2.5 - 3.5ml/Litre of both Parts A & B
Dutch Pro - Auto Flowering Bloom - Hydro/Coco A&B - Hard Water recommended pH: 5.8