RVK Fan & Rhino Pro Filter Extraction Kit
Tried and Tested Extraction Kits
RVK fans were built for use in industrial settings, making them practically indestructible! There are quieter and more efficient fans now available if you want to spend a little extra, but if you're looking for an extraction system that's solid and dependable, then RVK kits are perfect for the job. You have a choice of fan size which comes with a perfectly matched, professional level Rhino Filter.
- Money-saving deal over buying the items individually
- Available in several sizes to suit your needs
- Rugged and dependable RVK inline duct fan
- Rhino Pro Carbon Filter – a go-to choice for professional growers
- The fan, filter and ducting are all matched together for excellent performance
- Easy to use fast clamp makes joining the fan and filter a doddle
- Comes with five metres of ducting, allowing you to vent to a convenient point
1 x Systemair RVK Sileo inline duct fan in either 4" (100mm), 5" (125mm), 6" (150mm), 8" (200mm), 10" (250mm) and 12" (315mm) (more than one air flow option exists for some sizes)
1 x Rhino Pro carbon filter (to match your RVK size)
1 x 5m length of Aluminum Flexi-Ducting
1 x 2m Mains IEC Lead
1 x Fast Clamp
1 x Duct Clip
Recommended Additional Purchases
Hanging equipment - to mount your extraction kit at the top of your grow room or grow tent
Which Size Kit Do I Need for My Grow Tent?
Find out the volume of your grow space in cubic metres: width x length x height = volume
For example: 1.2m x 1.2m x 2.0m = 2.88m3
You'll need to have the capacity to replace this volume of air once per minute. Multiply the volume figure by sixty to work out the airflow needed per hour.
2.88m3 x 60 = 172.80m3
Carbon filters add some extra load to your fan. To account for this, multiply the required airflow by 1.2, which will give you some spare capacity.
172.80m3 x 1.2 = 207.36m3
Note that it is always better to over-spec your fan and regulate it with a controller. This gives you the flexibility to increase output levels if temperatures rise.
4" (100mm) 184m3/hr (RVK A1) with 100mm/300mm Rhino Pro Filter
5" (125mm) 220m3/hr (RVK A1) with 125mm/300mm Rhino Pro Filter
5" (125mm) 323m3/hr (RVK L1) with 125mm/300mm Rhino Pro Filter
6" (150mm) 428m3/hr (RVK A1) with 150mm/300mm Rhino Pro Filter
6" (150mm) 720m3/hr (RVK L1) with 150mm/600mm Rhino Pro Filter
8" (200mm) 796m3/hr (RVK A1) with 200mm/400mm Rhino Pro Filter
8" (200mm) 1008m3/hr (RVK L1) with 200mm/600mm Rhino Pro Filter
10" (250mm) 780m3/hr (RVK A1) with 250mm/600mm Rhino Pro Filter
10" (250mm) 1080m3/hr (RVK L1) with 250mm/600mm Rhino Pro Filter
12" (315mm) 1300m3/hr (RVK A1) with 315mm/600mm Rhino Pro Filter
12" (315mm) 1800m3/hr (RVK A1) with 315mm/600mm Rhino Hobby Filter
How the RVK Fan & Rhino Pro Filter Extraction Kit Works
Our RVK & Rhino Pro Extraction Kit contains everything you need to remove stale air and odours from your grow room or grow tent. All the parts are top quality and matched to work together perfectly. Systemair RVK fans are notoriously well-made and reliable whilst Rhino Pro Filters are, quite simply, one of the best carbon filters that money can buy. A fast clamp makes easy work of joining the fan and filter together while five metres of ducting and a duct clip allow you to vent to a convenient outlet. A power cable with a moulded mains plug for the extraction fan completes the set-up.
How to Use the RVK Fan & Rhino Pro Filter Extraction Kit
Check out the following blog post for a visual guide to installing extraction systems. Note that this kit includes a fast clamp, so the method of joining up the fan and filter is slightly different in this case.
Make sure that you hang the system at the top of your grow area (to remove hot air) and make sure that ducting leads to an outside point. Keep ducting runs as short as possible, as every extra metre of ducting reduces the maximum flow-rate. Try not to include sharp bends in the layout of your ducting or you will reduce the effectiveness of your system.