Rope Ratchet Hangers (Pair)
Tough & Robust Hangers that Can Handle 68kg Per Pair!
Rope Ratchet Hangers make it simple to hang large and heavy items up to 68kg in weight! Rope Ratchet Hangers are strong and height is easily adjusted in a moment. If you're looking to hang extremely heavy equipment, like large extraction systems, then check out our Heavy-Duty Rope Ratchets.
- Easily adjust the height of your reflector, carbon filter etc. in a moment
- Strong cords, 1.8m long at full extension
- Well-made and reliable
- Items can be raised by simply pulling on the cord
- Items can be lowered again by simply flicking the ratchet lever catch
- Suitable for items up to 68kg when used as a pair, or 34kg each
1 x Pair of Rope Ratchet Hangers
How Rope Ratchet Hangers Work
A Rope Ratchet Hanger is a strong 1.8 metre long cord with a spring hook (carabiner) at one end and a ratchet block with an attached spring hook (carabiner) which is located along the cord's length. The ratchet block allows cord to be pulled through it in one direction but will grip and lock the cord in place when it is pulled in the other direction. Flicking up the ratchet release lever allows the cord to go through it in either direction. The spring hooks (carabiners) make it easy to securely clip the end of the cord or the ratchet block to ceiling or tent fixtures or to items of equipment for suspension.
Rope Ratchet hangers come as a pair for securely hanging almost anything such as a carbon filter or reflector. When used as a pair, the combined weight that they can suspend is anything up to 68kg, or one can be used to carry up to 34kg. The ratchet hangers are very reliable items of equipment that are very tough and never slip. Highly recommended!
How to Use Rope Ratchet Hangers:
Progrip Rope Ratchet hangers are suitable for hanging almost all items of equipment up to 34Kg in weight when used singularly or up to 68kg when used as a pair. There is no minimum weight that they need to work properly and so are ideal for very light reflectors such as the Euro Reflector or heavier carbon filters that our Easy Rolls do not work with.
One end of the rope ratchet hanger can be attached to an appropriate ceiling hook or tent frame while the other can be attached to the item to be suspended. Once an item has been suspended in this way, pulling on the spare cord end will pull the cord through the ratchet block, shortening the cord on the weight-carrying side and so raising the height of the item. The ratchet block then holds the item at that height securely. The ratchet is released by flicking up the ratchet release lever on the ratchet block. This allows the spare cord to run back through the ratchet block, lowering the item again.
When using rope ratchet hangers, it is important to remember that the ceiling fixtures or tent frame must also be able to hold the weight that you are going to suspend from them. In order to handle the full 68kg weight capacity of the rope ratchet hangers, your fixtures or tent frame will need to be very strong and secure and capable of carrying the weight also. When using ratchet hangers it is important that the rope does not get damaged by rubbing against anything abrasive or sharp or by being pinched between anything as this will reduce the weight carrying capacity and lifespan.