Phonic Trap Ultra Silent Acoustic Ducting - 10 Metre Length

PHONIC TRAPSKU: 763640

Size: 6 Inch (150mm)
Price:
Sale price£91.99

Phonic Trap Ultra Silent Acoustic Ducting - 10 Metres

Phonic Trap Acoustic Ducting is super silent, and super effective – helping to reduce any noise produced by your extraction system. It’s time to ditch your old ducting, and get some Phonic Trap to help keep your grow room whisper quiet.

How Phonic Trap Works

  • The black foil outer layer is made from high-quality layered aluminium with a metal spiral that minimises kinks, preventing obstructions from limiting airflow.
  • The white insulation was designed to allow air to travel through it without causing back pressure on the fan.
  • The inter-woven material was, again, designed to insulate the sound without reducing air flow. The cross woven design dampens noise but does not increase pressure, unlike the cheap copies. The copies are made from a woollen-style material that causes a huge pressure restriction. This puts more PA on the fan reducing the air flow in the room, sometimes drastically. Lower airflow levels give you less control over the environment, causing issues with temperature and humidity, slowing down plant growth and increasing the chances of encountering powdery mildew... Buy the original and get the peace of mind instead.

To see our full Ducting & Fittings range, click here

Contains

Contains

1 x 10 metre length of Phonic Trap Acoustic Ducting (available in 4 inch, 5 inch, 6 inch, 8 inch, 10 inch and 12 inch sized ducting)

About

  • Massively reduces the noise caused by airflow
  • Ultra efficient and flexible material
  • Incredible high quality
  • Non-allergenic – made without any glass wool
  • Sleek design, and tough material
  • 10 metres long – comes in 6 sizes of ducting
  • Want a cheaper alternative? Checkout the Vortex Ultra Silent ducting!

How To Use

How to Use Phonic Trap

Phonic Trap acoustic ducting fits directly over the flange of any appropriately-sized extractor fan or filter, and an appropriately sized duct clip is usually used to hold it tightly in place. The acoustic ducting can then be run to your air outlet/inlet. Although Phonic Trap acoustic ducting works fine when run loose, the noise coming out of the end of the ducting will be greatly reduced if it is stretched out as much as possible. To reduce Phonic Trap Acoustic Ducting down to the correct length, use a sharp pair of scissors to cut the aluminium and fibreglass and a pair of sharp wire cutters to snip the spiral wires in the appropriate place.

You may also like

Recently viewed