25mm Barbed Irrigation Fittings

Please Note - We'd always recomend using Hose Clips to make sure you've a water tight seal around your pipe/fittings to prevent any leaks.

25mm Barbed Irrigation Fittings

The 25mm Barbed Fittings will fit perfectly onto any 25mm internal diameter pipework. Barbed solid plastic connections ensure a strong and secure grip on your pipework. No special connectors or tools are required as they just push into your 25mm pipework, these are typically used to add pots to your system or to replace lost or damaged components.

25mm Barbed In-Line Filter

The 25mm Inline Barbed Filter helps prevent salt build ups and blockages in your drip lines and drippers using the removable filter insert. The filter insert can be quickly removed and cleaned in minutes, we recommend doing this once a week to avoid the filter insert becoming clogged. The 25mm Inline Barbed Filter fitting requires no specialist tools or connectors. Fit between your water pump and irrigation line that feeds your plants.

25mm Barbed Tee

25mm Tee Piece Connector enables you to create and alter pipework and irrigation layouts, suitable for use with 25mm LDPE and 25mm flexible pipe. Can be used to create a custom made hydropoinc irrigation system or used to split existing 25mm pipework already in use.

25mm Barbed Elbow

25mm Barbed Cross Connector enables you to create and alter pipework and irrigation layouts, suitable for use with 25mm LDPE and 25mm flexible pipe. Can be used to create a custom made hydropoinc irrigation system or used to split existing 25mm pipework already in use.

25mm Barbed Straight

25mm Barbed Tee Piece Connector enables you to create and alter pipework and irrigation layouts, suitable for use with 25mm LDPE and 25mm flexible pipe. Can be used to create a custom made hydropoinc irrigation system or used to split existing 25mm pipework already in use.

25mm Flow Control Tap

The 25mm Barbed Flow Control Tap fits perfectly onto any 25mm pipework and is especially useful for R-DWC systems. It's barbed solid plastic connections ensure a strong and secure grip on your pipework. No special connectors or tools are required as it just pushes into your 25mm pipework, these are typically used between irrigation lines to adjust water flow or when isolating parts of your DWC irrigation system

25mm to 13mm Barbed Reducer

The 25mm Barbed reducer fits perfectly onto any 25mm pipework and will convert the internal diameter of the pipe to 13mm.

25mm Barbed Non-Return Valve

The 25mm Barbed Non-Return Valve is used to stop liquid from flowing back the way it has been pumped, such as the waste outlet from a run to waste brain

25mm Barbed End Stop

The 25mm Barbed End Stop is used to cap the end of 25mm pipe work

25mm to 19mm Barbed End Stop

The 25mm to 19mm Barbed Reducer fits perfectly onto any 25mm pipework and will convert the internal diameter of the pipe to 19mm.

25mm Barbed Female Swivel Elbow

The 25mm Barbed Female Swivel elbow is designed to be connected to a 1" threaded tank connector.