Next Generation Fan Control With an Eye Catching OLED Display
The latest EC fan controller (GAS EC5 Fan Speed Controller) from Global Air Supplies allows you to control every aspect of your intake and extraction system, giving you the ability to fine tune your setup for the perfect environment. Not only will you be able to control your fans thermostatically, you also have the ability to balance your fans to achieve the perfect level of negative pressure, stopping any unwanted odours from escaping your grow space without having to use a separate balancer.
How the GAS EC5 Fan Speed Controller Works
Simply connect your G.A.S Vector EC Intake & Outtake fans via the active control cables provided in the box, to the control connection on your G.A.S EC fan. Once connected, run the temperature probe of the GAS EC5 as close as possible to the centre of the grow space. Now, simply turn each dial on the face of the controller to the desired setting, this includes the desired grow space temperature and min and max dials for both intake and extraction. And that's it! Simple, yet very effective.
To see our full Fan Speed Controllers range, click here
1 x GAS EC5 Fan Speed Controller, 1 x GAS 5m Active Male to Male Cable (Pack 8)
Recommended Additional Purchases
1 x GAS 5m Active Male to Male Cable (Pack 8) - the EC5 Fan Speed Controller is supplied with one of these cables, which is used to connect up your Vector extraction. However, you'll need to purchase another if you want to run a Vector intake fan at the same time. Make sure that you get the active versions. Check out the One Stop Blog for more info.
If you're using Hyper Fan V2s, then you'll just need an adapter for each unit, as they already come with cables. Look for the G.A.S Hyper Fan Adapter (Cable Pack 16).
