Dimlux Extreme 250w / 400w / 600w - 230 Volt Adjustable Ballast

Lots In stock
Delivery within 1-3 working days
  • Drives 250w, 400w and 600w HPS and MH lamps
  • Stylish design combined with rock solid build quality
  • No buzzing sounds!
  • Maxi Controller compatible
  • Yield-boosting overdrive facility
  • More efficient than typical core and coil ballasts
  • Hard-wired power cable

Dimlux Extreme - Great for Growers Running 230v Set-Ups

The Dimlux Extreme 600w Ballast is a high-quality adjustable digital ballast that is capable of running at 250w, 400w, 600w and 660w (overdrive) output settings. The appearance of the unit is incredibly stylish, and the build quality is absolutely rock-solid. It’s also compatible with the Dimlux Maxi Controller, so you can take advantage of a range of additional features.

How the Dimlux Extreme Ballast Works:

The 230 volt Extreme Ballast converts mains electricity to the correct voltage and current to start-up and power 250w, 400w and 600w HPS and MH lamps, using a microprocessor to constantly monitor and control a digital power-output system. Digital Ballasts produce more lumen output, use less electricity and do not degrade with age like core and coil type ballasts which become noisy, use more electricity and produce less lumens as they get older.

The Extreme 600w Ballast features output settings of 250w, 400w, 600w and 660w, allowing you to tailor lighting to your plants’ exact needs at any given time. Better yet, you can connect this ballast quickly and easily to your Dimlux Maxi Controller and take advantage of the range of features that it has to offer - 160 of these ballasts can then be controlled from a central point.

Runs a 250w HPS lamp at 250w
Runs a 400w HPS lamp at 250w and 400w
Runs a 600w HPS lamp at 250w, 400w and 600w
Runs a 250w MH lamp at 250w
Runs a 400w MH lamp at 400w
Runs a 600w MH lamp at 600w


1 x 250w/400w/600w adjustable digital ballast with 1.8 metre mains cable

How to Use the Dimlux Extreme Ballast:

Although the Dimlux Extreme Ballast runs fairly cool in use, it should still be located on a flat, firm, surface (not carpet) and in a well-ventilated location. The ballast has built-in fixtures so that it can be mounted to a wall. It should never be covered and there should be no combustible items in the vicinity, just in case. Connect the input lead of your reflector to the output lead of the ballast ensuring the cable is not pulled tight and does not come into contact with anything hot (e.g. lamp, reflector, ballast). Ensure your lamp is tightly screwed into the bulb-holder and that your reflector is at the correct height.

If you’re using this ballast in conjunction with a Maxi Controller, you can power it directly from a mains socket or use one of the following power distribution units:

Green Power 4-Way Powerbox

Green Power 6-Way Powerbox

Green Power 8-Way Powerbox

If you’re not using a Maxi Controller to regulate on/off times, you’ll need to use this ballast in conjunction with a suitable contactor / timer.

Please see the link below for a copy of the Dimlux warranty.

Write Your Own Review
You're reviewing:Dimlux Extreme 250w / 400w / 600w - 230 Volt Adjustable Ballast