Vortex White Combi-Ducting - 5 Metre Length

Save £7.24
VORTEXSKU: 85661

Size: 6 Inch (150mm)
Price:
Sale price£7.25 Regular price£14.49

White Combi-Ducting in 5 Metre Lengths

Combi-Ducting is used to as part of your ventilation system to move air to and from the grow area, replenishing CO2 and removing excess heat and humidity. Combi-Ducting has a double-layered construction with an aluminium inner and a plastic outer, greatly increasing its resistance to tearing while also preventing light leaks.

How Combi-Ducting Works

With both an internal aluminium sheath and a layer of plastic around the outside, combi-ducting is much more resistant to tearing than standard aluminium flexi ducting, as well as being fully lightproof.

Combi-ducting is generally used to carry air from your extractor fan/filter to an outlet nearby. It can also be used to carry fresh air into your grow-space from an inlet. It can easily be shaped around corners and will concertina down to a very short length if needed.

To see our full Ducting & Fittings range, click here

Contains

Contains

5 Metres of Combi-Ducting in the diameter of your choice

About

  • Choice of Diameter Size to fit any Extraction System
  • Dual-layered construction – aluminium sheath with PVC outer
  • Greater resistance to tearing than standard aluminium ducting
  • Reduced noise levels compared with single layered ducting
  • Reinforced by a spiral wound wire to maintain its cross-sectional area
  • Prevents light leaks
  • Economical and easy to use
  • 5 Metre Length

How To Use

How to Use Combi-Ducting

Combi-ducting fits directly over the flange of your same-diameter extractor fan or filter and an appropriately sized duct clip is usually used to hold it tightly in place. The ducting can then be run to your air outlet/inlet. Although Combi-Ducting works fine when run loose, the noise from air-flow through the ducting will be greatly reduced if it is stretched out as much as possible. To reduce Combi-Ducting down to the correct length, use a sharp pair of scissors to cut the aluminium and a pair of sharp wire cutters to snip the spiral wire in the appropriate place.

You may also like

Recently viewed