Sol-Digital Stealth Euro DE Reflector for 1000w / 400v Lamp
- Simple design
- For use with 1000 watt 400v lamps
- Reliable, respected manufacturer
20% OFF EVERYTHING ONLINE - ENDS MONDAY
This reflector is the most simple and economical way of using the higher end 1000 watt 400 volt lamps on the market. Sol-Digital products are known for their quality and reliablity so you can be confident that this simple design will deliver spot on results at an affordable price.
The Sol Digital DE Euro can be a replacement for reflectors included in kits such as the Adjusta-Watt 400v Super HPS Kit that are damaged or showing signs of reduced reflectivity.
Recommended lamp for this reflector - Sol-Digital Super HPS 400v DE 1000w
This is no ordinary Euro Reflector. For a start, it's equipped to house the double ended lamp (K12x30s holder). It's officially certified as 95% reflective, with excellent diffusion levels, and is built to a very high standard, with a branded top plate and V-shaped hangers for attaching your rope ratchets or hangers. The lamp cord is also fully shielded, eliminating the chances of interference with radio or broadband equipment.
To see our full Reflectors range, click here
1 x Sol-Digital Stealth Euro Double Ended Reflector
47cm x 35cm x 35cm
Holding your lamp with a clean cloth, insert it into the K12x30s bulb-holder at both ends, making sure that the lamp end with the additional tag (please see image above) is at the ballast end of the fitting and slide the mechanism towards the centre to lock in the lamp.Hang the reflector over the centre of the grow-space at an appropriate height using easy rolls or jack chain. Plug the lead into an appropriate 400v ballast and switch on.
Warning: When HID lamps are switched on they run extremely hot. As with all high pressure sodium and metal halide bulbs it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.
To fit your double ended lamp correctly see the image below
Ensure that you follow manufacturer's guidelines when fitting your double ended lamp, as incorrect fitting will result in damage. This damage is NOT covered under the manufacturer's warranty.