Designed to Match Each Other Perfectly, the Revolution Vector and CarboAir are an Unbeatable Combination - with Phonic Trap Ducting!
The Silenced Revolution Vector and CarboAir kit gives you everything you need for unbeatable extraction. The Silenced Revolution Vector is internally the same as the non silenced version but in an acoustic housing. It's manufacturer System Air has gone to ever effort to make this fan as quiet and efficient as possible. Silenced Vector fans move an incredible amount of air and are the result of years of testing and millions of pounds of research. Their frictionless EC motor allows regulation of the fan speed from 1-100% and massive energy savings in comparison to other fans. Unlike RVK fans, which output air at around 90 degrees, air exits the Silenced Revolution Vector in almost a straight line, making it travel much more efficiently down your ducting and create less noise along the way. Not only that, it's a single sealed unit so you can rest assured no smells will escape from your fan housing.
Until now carbon filter manufacturers have given you the choice between filters which either massively stifle your fan or inefficiently remove smells. The included CarboAir filters (Pro Grow Filters) offer thicker beds (60mm opposed to the industry average 50mm) of coarser, high quality carbon. This not only allows incredible air flow, it removes any possible traces of smells. Alongside this ultimate duo you will receive Phonic Trap Ducting, super-sleek insulation lined to remove any excess air movement noise from your extraction set up.
The kits are available in multiple sizes, please click the drop down to view available set ups. Use our handy guide below to figure out which is best for you.
How the Silenced Revolution Vector V2 & CarboAir Filter Extraction Kit Works
The extractor fan in your grow room removes hot, stale air and excess moisture from your grow room, which in turn draws fresh air in, controlling the environment and replacing CO2. If you're growing plants that have strong, unwanted odours, you're going to need to filter this air first before ducting it to an outside point. Your carbon filter attaches to your extractor fan - air gets sucked through an outer layer of mesh and through an internal layer of carbon before passing through your extraction system. It then leaves clean and free of any odours, keeping unwanted smells locked firmly inside the grow space.
Airflow Rates
Silenced Revolution Vector (EC) 150 (6") - 764 m3/hr with 60mm bed CarboAir 150mm/660mm
Silenced Revolution Vector (EC) 200 (8") - 1345 m3/hr with 60mm bed CarboAir 200mm/660mm
Silenced Revolution Vector (EC) 250 (10") - 1787 m3/hr with 60mm bed CarboAir 250mm/1000mm
Silenced Revolution Vector (EC) 250-L (10") - 2102 m3/hr with 60mm bed CarboAir 250mm/1000mm
Silenced Revolution Vector (EC) 315-L (12") - 2224 m3/hr with 60mm bed CarboAir 315mm/1000mm
To see our full Digital Extraction Kits range, click here
Contains
Contains
1 x Silenced Revolution Vector V2 fan (choose your size from the drop down menu)
1 x 60mm Bed Depth CarboAir Filter (to match your choice of fan)
1 x 6m of Phonic Trap Ducting (or 1 x 10m box for the 12-inch kit)
1 x Fast Clamp
2 x Duct Clips (included in Phonic Trap Box)
1 x Terminator Cable (which allows you to run the fan without a controller)
About
- Silenced Revolution Vector and CarboAir, Designed to perfectly match each other
- Features a cutting edge frictionless EC motor
- Can be regulated from 1-100% - fine tune your environment
- Saves you money - uses 50% of the energy of other fans
- 60mm high quality coarse CarboAir carbon bed depth gives more contact time, offering unbeatable airflow and eradication of unwanted odours
- Sealed fan unit, ensuring no smelly air leaks from your fan
- Includes Phonic Trap Ducting, removing unwanted air movement noise from your extraction.
- All fittings and fixtures included
How To Use
How to Use the Silenced Revolution Vector V2 & CarboAir Filter Extraction Kit
Check out the following blog post for a visual guide to installing extraction systems. Note that this kit includes a fast clamp, so the method of joining up the fan and filter is slightly different in this case.
Make sure that you hang the system at the top of your grow area (to remove hot air) and make sure that ducting leads to an outside point. Keep ducting runs as short as possible, as every extra metre of ducting reduces the maximum flow-rate. Try not to include sharp bends in the layout of your ducting or you will reduce the effectiveness of your system.