Shogun Samurai Coco Multi pack

0-day delivery
Lots In stock
Delivery within 1-3 working days
  • Shogun Samurai Coco Multi Pack contains everything you need to get stated
  • Perfect for beginners and seasoned growers alike
  • Developed by leading bio-chemists and formulated for U.K water
  • SmartZen featured in Samurai Coco A and B hugely increases photosynthesis and lowers heat stress
  • Shogun Samurai Coco A and B contains AquaZen for superior water distribution throughout coco fibre
  • All Shogun products are highly concentrated and cost effective
  • Multi pack contains Katana roots for rapid root growth, Silicon for added plant strength and Calmag as a rich source of calcium and magnesium
  • Shogun Samurai Coco Multi Pack also contains Sumo Active Boost, PK Warrior 9/18 and Dragon Force for explosive combined flower formation

Enjoy the Shogun Samurai Coco Range in this Handy Multi Pack, Perfect for Both Beginners and Experienced Growers Alike

The Shogun Samurai Coco Multi Pack has everything you need to get growing in coco medium from start to finish. Covering every spectrum for superior plant health, Shogun have compiled this multi pack to get your grow off to a flying start. Included is Shogun's Katana Roots for explosive root formation, the heavyweight stimulant Shogun Sumo Active Boost which bolsters quality, aroma and flavour, finishing up with the expertly formulated Shogun Dragon Force to add extra weight to your flowers. Alongside the Shogun A and B nutrients you can be sure to have all bases covered in both vegetation and flower.


Recommended Additional Purchases

Growers Water Conditioning Toolkit

Bluelab Expert Water Conditioning Toolkit


How Shogun Samurai Coco Multi Pack Works

Building on the success of their awesome range of additives and boosters, Shogun have done it again with the Shogun Samurai Coco Multi Pack. It contains just about everything you will need to begin your coco adventure or if you're already a coco pro then this multi pack will work just as well in experienced hands. This particular multi pack is for growing in coco and should cover an entire grow from start to finish depending on your plant numbers and growing area, typically a 1.2 meter sqaure tent containing 3-4 plants. The Shogun Samurai 1 Litre A and B contains 2 exclusive additives that sets it totally apart from the rest of the coco base nutrients on the market called SmartZen and AquaZen.

SmartZen is a blend of sterols, lignan's, tannin, lipids and hydrocarbons. Together, they give a huge increase in photosynthesis and lower any heat stress. These ingredients are not found in any other base nutrient, yet they have been shown to increase yields by 6-8%. SmartZen also helps plants cope when temperatures go out of the ordinary too. As if that wasn't enough, Shogun Samurai coco nutrient also contains AquaZen - a special ingredient that ensures that the coco fibre in your pots is wetted evenly and thoroughly to the optimum level for the very best root development. In some cases, your feed water can flow straight through the coco fibre in your pot without wetting it properly, this is called false drain. AquaZen improves the penetration and wetting ability of the feed water. As you might expect, the main ingredients are all of the highest quality, supplying all the nitrogen, phosphorous and potassium that the plant needs, along with all the micro-nutrients that they require too so all your bases are covered.

To see the full Shogun range, click here



1x Samurai Coco 1 Litre A and B, 1x 250ml Katana Roots, 1x 250ml Silicon, 1x 250ml CalMag, 1x 250ml PK Warrior 9/18, 1x 250ml Sumo Active Boost, 1x 250ml Dragon Force and a Shogun Coco Grow Chart

Shogun Katana Roots - A Highly Powerful Root Stimulator

Encourages the growth of new roots and greatly improves success rates for your cuttings and seedlings. It also works to improve overall root health, which ensures that nutrients are up taken by the plant as efficiently and effectively as possible. Shogun Silicon is an additive that can be used from the moment your cuttings or seedlings develop roots, right up to the final flowering stages (just before flushing). It works by strengthening the walls of plant cells, which in turn produces thicker stems and stronger branches that can support more weight. Shogun Silicon also increases the production of chlorophyll, which optimises the use of co2 in the surrounding atmosphere, accelerating the process of photosynthesis. This leads to greener leaves and an all-round improvement in plant vigour.

Shogun Calmag - Fortifies Overall Plant-Structure, Leading to Thicker Stems and Stronger Branches

An additive that can be used alongside your base nutrient from the late vegetative stages, right through to the end of the flowering stage, just before the final flush. It contains nitrogen (2.6%), calcium (3.2%), magnesium (1.2%) and a trace amount of iron (0.1%). Magnesium is a vital component of chlorophyll, the green pigment that is essential to the process of photosynthesis. Without a healthy supply of magnesium, the process of photosynthesis will slow down to a crawl and the energy produced by your lighting system will be rendered much less effective. Calcium helps to increase the thickness of cell walls and improves the transportation of nutrients between different areas of the plant, making the nitrogen, phosphorus and potassium in your base feed that much more effective. This in turn promotes an all-round increase in vitality.

Shogun PK Warrior 9/18 - Stimulates Essential Oil Production and Increases Flower Density

Shogun PK Warrior 9/18 is a flowering additive that is used alongside your base nutrient to increase levels of phosphorus and potassium during the later stages of the bloom phase, when your plants need them most. Unlike many other PK boosters on the market, Shogun PK Warrior has a ratio of 9/18:  for every 100 parts of undiluted feed, 9 parts are phosphorus and 18 parts are potassium. Whereas most PK boosters are used for relatively short periods of time around three weeks before harvest, Shogun PK Warrior’s 9/18 ratio can be used effectively from week 4 of the flowering phase right up until the final flush, 1-2 weeks before the finish. The effects are nothing short of miraculous – Shogun PK Warrior stimulates essential oil production to the point where there’s a huge visible increase in density. We highly recommend supplementing with Shogun Silicon and Calmag to increase the structural strength of stems and branches accordingly – otherwise, they may well struggle to support the weight!

Shogun Sumo Active Boost - Promotes an Upsurge in Your Plants Metabolism and Can Add a Further 10% to Your Yields!

Shogun Sumo Active Boost took 3 years to develop. One of the ingredients that makes it stand out from the crowd is something called triacontanol at the ideal concentration of 0.05%. Triacontanol is a naturally occurring phytohormone that is found in most plant matter. Blended with other great natural ingredients like fulvic acid, humates, cytokinins, fucoidan, betaine, amino acids, vitamins and polysaccharides, Sumo Active Boost does your plants a whole world of good! It increases CO2 assimilation, plant respiration, essential oil production, regulates gene expression, whilst regulating stress and increases metabolism in both the vegetative and flowering stage of a plants life cycle. Sumo Active Boost is primarily a flowering additive that can be used as a foliar spray or administered through roots. It triggers an explosive upsurge in your plants' metabolism, stimulating essential oil production and adding up to 10% to the final weight!

Shogun Dragon Force - Use in the Final Stages of Flower for Massive Yields

Shogun Dragon Force is a complete feed that provides plants with everything they need for the very last feeding stages, just before they’re ready to start flushing. When using Shogun Dragon Force, you can even stop using your base nutrient and PK additive altogether as Shogun Dragon Force has it covered! It contains highly available forms of phosphorus (9.5%), potassium (6.9%), magnesium (2.6%) and sulphur (2.5%). Phosphorus and potassium are primary macro nutrients that are essential to the development of healthy fruits and flowers. Magnesium is a vital component of chlorophyll, the green pigment that drives the process of photosynthesis while sulphur is also included in the Shogun Dragon Force it's another secondary macro nutrient that is often overlooked. Sulphur is an element that forms a key component of many amino acids – the building blocks of life. Sulfur also assists with the uptake of other nutrients, like phosphorus.

These yield-enhancing ingredients are combined at optimized ratios to push plants to their absolute limits during the most crucial stages of the flowering phase, gifting the grower heavy yields while still retaining a truly exceptional end product.

How to Use the Shogun Samurai Coco Multi Pack

Shogun Samurai Coco Nutrient is used for plants grown in coco either hydroponically or by hand-watering. It is designed to be used right the way through the grow in both the vegetative and flowering stages. With an aim to get at least 20-40% run-off EVERY DAY for best results and the healthiest root zone. Fill your hydroponic system reservoir or watering container with water and add equal amounts of Shogun Samurai Coco Nutrient Part A and Samurai Coco Nutrient Part B to the tank to achieve the required strength and mix well. Shogun recommend a dosage of 2 to 4 ml/Litre of both part A and part B. We recommend using a syringe or beaker for accurate measurement of this product and a CF/EC/PPM meter such as the Bluelab Truncheon to check the overall nutrient strength.

Next, add any additives and boosters you wish to use depending on your growing cycle and mix well. Adjust the pH of the solution to the required level using pH up or down as necessary. We suggest an optimum pH of 5.8 for best results. We recommend the use of a pH meter such as the Bluelab Ph Pen to help accurately set the pH to the required level. It is recommended you renew the nutrient solution in your reservoir every 7 days. Both parts of a 2-part nutrient are designed to be used together in equal amounts. Using only part, A or part B, or using them in unequal amounts will result in a nutrient solution which is not properly balanced. This will almost certainly lead to your plants suffering from deficiencies.

As with all nutrients, boosters and additives, never mix them together in their concentrated form (i.e.straight out of the bottle). Always add each nutrient, booster or additive to your reservoir or feed water in turn, giving the solution a good stir to mix it in before adding the next one. Manufacturer's recommended dosage rates are only for vigorously growing plants that are in the peak of health. Slower growing plants and those that are not 100% healthy will require a lower dosage rate. Learn more about how to control nutrient strength and pH levels in hydroponics in our blog guides: Control of Nutrient Strength Levels in Hydroponics and pH Control in Hydroponics

Shogun Samurai Coco Nutrient recommended dosage: 2 - 4ml/per litre as a nutrient baseline, consult the feeding chart supplied and check your E.C and Ph meters to accurately feed your plants. 

Write Your Own Review
You're reviewing:Shogun Samurai Coco Multi pack