Designed to Match Each Other Perfectly, the Revolution Vector and CarboAir are an Unbeatable Combination - Now with Phonic Trap Ducting!
The Revolution Vector and CarboAir kit gives you everything you need for unbeatable extraction. Vector fans move an incredible amount of air and are the result of years of testing and millions of pounds of research by their manufacturer System Air. They have a frictionless EC motor allowing regulation of the fan speed from 1-100% and massive energy savings in comparrison to other fans. Unlike RVK fans, which output air at around 90 degrees, air exits the Revolution Vector in almost a straight line, making it travel much more efficiently down your ducting and create less noise along the way. Not only that, it's a single sealed unit so you can rest assured no smells will escape from your fan housing.
Until now carbon filter manufacturers have given you the choice between filters which either massively stifle your fan or inefficiently remove smells. The included CarboAir filters (Pro Grow Filters) offer thicker beds (60mm opposed to the industry average 50mm) of coarser, high quality carbon. This not only allows incredible air flow it removes any possible traces of smells. Alongside this ultimate duo you will receive Phonic Trap Ducting, insulation lined to remove any excess air movement noise from your extraction set up.
The kits are available in multiple sizes, please click the drop down to view available set ups. Use our handy guide below to figure out which is best for you.
Recommended additional purchase: Phonic Trap Quick Connection Kit
Want to wall mount your Revolution Duct Fan? Buy a Revolution Fan Bracket here.
How the Vector Extraction Kit Works
The extractor fan in your grow room removes hot, stale air and excess moisture from your grow room, which in turn draws fresh air in, controlling the environment and replacing CO2. If you're growing plants that have strong, unwanted odours, you're going to need to filter this air first before ducting it to an outside point. Your carbon filter attaches to your extractor fan - air gets sucked through an outer layer of mesh and through an internal layer of carbon before passing through your extraction system. It then leaves clean and free of any odours, keeping unwanted smells locked firmly inside the grow space.
To see our full Digital Extraction Kits range, click here