Super Silent Revolution Vector & CarboAir Filter Extraction
  • 766316 14 inch
  • 766315 12 inch
  • 730165 systemair super silent revolution 315 vector ec fans
  • 765190 carboair 315 1000 75
  • 766316 14 inch
  • 730175 systemair super silent revolution 355 vector ec fans
  • 765195 carboair 355 1000 75

Super Silent Revolution Vector & CarboAir Filter Extraction

SKU:

Choose your ducting:

12" (315mm) 3784m3/hr

£1,399.95 £1,399.95
Super Silent Revolution Vector & CarboAir Filter Extraction
  • 766316 14 inch
  • 766315 12 inch
  • 730165 systemair super silent revolution 315 vector ec fans
  • 765190 carboair 315 1000 75
  • 766316 14 inch
  • 730175 systemair super silent revolution 355 vector ec fans
  • 765195 carboair 355 1000 75

The Super Silent Revolution Vector EC - The Pinacle of Commercial Level Fan Technology

Super Silent Vector EC fans are designed to deliver unbelieveable performance in the most demanding situations. They're extremely quiet relative to the ridiculous volume of air that they shift and they feature EC technology which makes them much more efficient, so you'll quickly save the initial outlay in power savings alone. Add a controller and their frictionless EC motor can be regulated in 1% increments (1-100%) giving you precise control over your environment (say goodbye to restrictive 5-step controllers!). Unlike other fans out there, air exits the Super Silenced Revolution Vector in a straight line, making it travel much more efficiently down your ducting, creating less noise along the way. It also forms a single, sealed unit so you can rest assured no smells will escape from your fan housing.

CarboAir filters offer thicker beds (75mm in this case, opposed to the industry average 50mm) of coarser, high quality carbon. This not only allows incredible air flow, but it also removes any possible traces of smells. Alongside this ultimate duo, you will receive Phonic Trap ducting, which is super-sleek and insulated to remove noise caused by excess air movement. 

The kits are available in multiple sizes, please click the drop down to view available set ups. Use our handy guide below to figure out which is best for you.

  • Buy any duct fan or extraction kit and get £40 off the G.A.S Enviro Controller!
  • Features the commercial-grade Super Silent Vector EC
  • Perfectly matched to a CarboAir 75mm-bed carbon filter
  • Features a cutting edge frictionless EC motor
  • Can be regulated from 1-100% - fine tune your environment
  • Saves you money - uses 50% of the energy of other fans
  • 60mm high quality coarse CarboAir carbon bed depth gives more contact time, offering unbeatable airflow and eradication of unwanted odours
  • Sealed fan unit, ensuring no smelly air leaks from your fan
  • Includes acoustic ducting, removing unwanted air movement noise from your extraction.
  • All fittings and fixtures included

Contains

1 x Super Silent Revolution Vector (EC) 315 (12") - 3784m3/hr or 355 (14") - 5929m3/r
1 x 75mm bed CarboAir 315mm/1000mm or 355mm/1000mm
1 x 10m of Phonic Trap ducting 
1 x Fast Clamp
2 x Duct Clips (included in Phonic Trap Box)
1 x Terminator Cable (which allows you to run the fan without a controller)

Which Size Kit Do I Need for my Grow Tent?

There exists a (relatively) easy formula to work out which size extraction you need for your space, find out the volume in m3 (metres cubed) of your grow space with Width x Length x Height = Volume, then Volume x 60 = Air Movement Per Hour (this will refresh the air in your grow room every minute).

Super Silent Revolution Vector (EC) 315 (12") - 3784m3/hr with 75mm bed CarboAir 315mm/1000mm

Super Silent Revolution Vector (EC) 355 (14") - 5929m3/hr with 75mm bed CarboAir 355mm/1000mm

Note that the total air movement will be reduced by the 'drag factor' of the filter. This is true for all extraction systems, though Revolution fans perform particularly well under load. See the image below for more info.

Super Silent

How the Super Silenced Revolution Vector Kit Works

Your extractor fan removes hot, stale air and excess moisture from your grow room, which in turn draws fresh air in, controlling the environment and replacing CO2. If you're growing plants that have strong, unwanted odours, you're going to need to filter this air first before ducting it to an outside point. Your carbon filter attaches to your extractor fan - air gets sucked through an outer layer of mesh and through an internal layer of carbon before passing through your extraction system. It then leaves clean and free of any odours, keeping unwanted smells locked firmly inside the grow space.

How to Use the Super Silenced Revolution Vector Kit

Before connecting to a power supply, join the fan and filter together using the fast clamp, ensuring that the fan is placed so that, when powered-up, it will be drawing air through the filter. There are hanging attachments on either side of the fan to help position the fan and filter easily. Rope Ratchets make a great additional purchase; they’re perfect for supporting larger items, and hanging fans in this way helps to lower vibration and reduce noise. Always position the fan and filter high-up in your grow space, in order to remove hot air as it rises, helping to control your grow area’s temperature. Place one end of the ducting onto the outlet side of the fan and secure it into place using the duct clip. The ducting should then be placed so that it runs to a suitable outlet point, preferably to an outside area.

Keep the layout of your acoustic ducting simple, forming the shortest, straightest route to an outside area possible. Following this advice will lower air-resistance and allow you to get as close to 100% efficiency as is achievable. Ducting arrangements that are too long or have too many bends will create unnecessary noise and lower the effectiveness of your extraction. Putting a little time and effort into planning this aspect of your grow will pay dividends, helping to keep the air that your plants depend on as fresh as possible.

The high-torque motors on these duct fans are incredibly powerful, so under no circumstance should you ever put your fingers anywhere near the fan blades when they are operational. Doing so will almost certainly result in serious injury.

Look for similar items