Sunlight Supply Block Buster Air-cooled Reflector (8”)
Sunlight Supply Super Sun 2 Air-Cooled Reflector (8")
Sunlight Supply are the makers of the finest quality reflectors available on the market today. The Super Sun 2 Reflector is no exception and is a superbly made reflector that brings you quality without compromise, for when only the best will do.
- Made with the finest quality materials
- Superb construction
- Highly reflective dimpled surface
- Amazingly even light-spread over 1m square area
- Closed ends with 200mm flanges for even better reflectivity and even light-spread
- Glass is included - requires only a 200mm extractor fan and ducting for air-cooling
- Can be used with any HID lamp - up to 1000W
- Perfect for use in a 1m square grow-tent
1 x Sunlight Supply Super Sun 2 Air-cooled Reflector with built in socket and 15ft lamp cord, terminated in an IEE plug
How the Super Sun 2 Works:
The Super Sun 2 Reflector is the choice for growers looking for the ultimate air-cooled reflector for a 1m square tent or similar size grow-area. The Super Sun 2 Air-cooled Reflector has a 200mm (8 inch) flange at each end for the fitting of ducting. The Super Sun 2 reflector has an amazingly reflective dimpled surface along with reflective closed-ends to reflect as much light as possible straight downwards towards your plants. The Super Sun 2 gives amazingly even light-spread in a 1m square grow-tent. The Super Sun 2 Reflector is made with only the best quality materials and the construction is second to none. There simply isn’t a better air-cooled reflector in its class.
How to Use the Super Sun 2:
The Super Sun 2 Reflector is designed for use with any horizontally mounted HPS or MH lamp. Simply hang the reflector over the centre of the grow-space at an appropriate height using easy rolls or jack chain. Holding your lamp with a clean cloth insert it into the E40 bulb-holder in the Super Sun 2 Reflector and screw it in very firmly. An extraction fan (200mm recommended) should be connected to one flange on the reflector via 200mm ducting. The other 200mm flange can be run to a fresh-air intake or hot-air exhaust via 200mm ducting. Plug the lead into an appropriate ballast for HPS/MH type bulbs or an IEE (kettle type) mains lead for fluorescent type bulbs and switch on. Please note that your extraction fan MUST be running while the lamp is being used.
Warning: When HID lamps are switched on they run extremely hot. As with all high pressure sodium and metal halide bulbs it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.
Sunlight Supply Super Sun 2 dimensions: Length – 31.5", Width – 27.5", Depth – 12.75"
Lamp sold separately