Sun System LEC 315 RA 315w CDM Grow Light Kit
Featuring a Prestige CDM Reflector Engineered by the Team at Sunlight Supply
This kit includes the LEC 315 RA, which was designed to squeeze every last bit of useable light from CDM lamps, by the team at Sunlight Supply, makers of the Dominator XXXL and the Blockbuster. You can choose from the two best CDM ballasts out there: the Maxibright Daylight and the Sol-Digital SuperBRIGHT. They will drive the supplied Philips lamp efficiently and effectively, and come with an array of features. For us, the Sol-Digital just pips it as the better ballast (due to it having a couple of extra features), but it's a close call.
We also offer a choice between the Philips GreenPower 930 Elite Agro Lamp and the Philips MasterColour 942 Daylight. The Elite Agro emits a broad light-spectrum that’s heavier in the red area, making it better for adding weight and improving oil production when flowering. The 942 Daylight's spectrum is optimised for rapid vegetative growth. It'll help to reduce your veg times and shorten the length of internodes, for tighter, stronger plants with less stretching. This helps you to make the best use of the space in your indoor garden, and in turn, will help you to maximise your yields.
- Produces light that's closer to natural sunlight than HPS lighting
- Delivers high levels of intensity in the optimal areas for plant growth and development
- Comes with the Sun System LEC 315
- The Rolls Royce of CDM reflectors
- Features a vertically mounted lamp
- A great balance between light spread and value-for-money
- Gives off 1.9 umols PPF per watt - amazingly efficient!
1 x 315w lamp of your choice (GreenPower 930 Elite Agro or MasterColour 942 Daylight)
1 x Maxibright Daylight 315w Ballast or Sol-Digital SuperBRIGHT 315w Ballast
1 x Sun System LEC 315 RA Reflector
How the Sun System Kit Works:
CDM lamps produce an intense full-spectrum light that plants love, but with a choice of two lamps, which lamp should I choose?
Philips GreenPower 930 Elite Agro CDM Lamp
The GreenPower 930 Elite Agro is perfect for flowering / fruiting as it has a very high PPF (photosynthetic photon flux) level. PPF levels quantify the useable plant light that will impact plant growth.
Philips MasterColour 942 Daylight CDM Lamp
We recommend using the the MasterColour 942 Daylight during veg growth. It gives off a crisp, white light, that delivers accelerated growth rates, good branching and short internodes. Using a properly optimised veg lamp will keep your plants shorter and will help you to use your grow space more efficiently.
The black line in the graph above represents the "McCree Curve", which gives a relative indication of how efficiently a plant uses the different colours in the light spectrum to photosynthesise with. To learn more about our light spectrum graphs and how they affect your plant, check out our blog.
The Sun System LEC 315 RA reflector uses the seriously innovative Light Emitting Ceramic (LEC - hence the name!) technology. Its specially constructed aluminium inserts offer excellent output, uniformity and diffusion meaning you get the best from your lamp, and by extension, your plants.
We offer a choice between the Maxibright Daylight and the Sol-Digital SuperBRIGHT ballast. Both are excellent ballasts that will drive Philips CDM lamps efficiently and effectively, but the Sol-Digital ballast comes with some interesting features that give it the edge, including ignition control, which prevents surges and spikes, and automatic frequency adjustment, which maintains a constant output from the lamp during input power fluctuations. Both feature soft start technology, to reduce inrush current, and intelligent circuit protection to keep your grow room safe and give you peace of mind. You won’t go wrong with either.
How to Use the Sun System Kit:
Simply hang the reflector over the centre of the grow-space at an appropriate height using easy rolls, rope ratchet hangers or jack chain.Fit the lamp into the reflector. Make sure that the lamp is clean and completely free of fingerprints and other contaminants. Finally, make sure that your reflector is hung at the correct height.
The ballast should be located on a flat, firm, surface (not carpet) in a well-ventilated place. Connect the input lead of your reflector to the output lead of the ballast ensuring the cable is not pulled tight and does not encounter anything hot (e.g. lamp, reflector, ballast).
The wattage of your ballast MUST match the wattage of the lamp you are using or there will be a high risk of fires or equipment damage. Only use the Maxibright ballast that comes with this kit for firing up the CDM lamps. Never use a HPS or MH ballast with CDM lamps. Connect the mains plug into an electrical outlet socket and switch on. The Maxibright CDM ballast will start-up and light the lamp.
PLEASE NOTE: The 315w CDM lamps need to be bedded in as follows: on first illumination the lamp needs to be run continuously for a minimum of 15 minutes. This will allow the metals within the lamp to fuse correctly.
FALIURE TO DO THIS WILL RESULT IN LAMP FAILIURE!
If the above is not adhered to, lamp warranty claims will be void.
Please note: With CDM lamps until they have achieved at least 10 hours of use (from new) that they should not be switched off for at least 2 minutes after switch-on. This includes testing during the initial installation. If it happens then the light needs to be left off for at least 1 hour before switching back on again. Failure to do this will damage the lamp and will lead to ignition problems.
Warning: When CDM HID (High Intensity Discharge) lamps are switched on they run extremely hot. As with all HID lamps it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular, avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.