Soler and Palau Acoustic Box Fan
Soler and Palau Acoustic Box Fans
Soler and Palau Acoustic Box Fans are designed for noise sensitive environments where keeping noise levels down are a priority. These fans are extremely quiet in operation due to the dense acoustic insulation within the box itself. Use it with acoustic ducting or Phonic Trap ducting to further reduce noise levels for all ventilation used.
- Soler and Palau Acoustic Box Fans are extremely powerful yet run whsiper quiet
- Acoustic insulation absorbs virtually all sound, perfect for when silence is required
- Lightweight and compact design for any size growing area
- High quality metal casing features a removable top plate for easy access to the fan
- Single phase direct-drive forward curved centrifugal fan
- All Soler and Palau motors feature thermal protection
- Easy to install with four mounting feet, can be mounted vertically or horizontally
- Soler and Palau fans operate at temperature from -20ºC to +40ºC with intergrated rubber air seals
1x Soler and Palau Acoustic Box Fan of your choice
- Soler and Palau 8" (200mm) : 690m3/hr
- Soler and Palua 10" (250mm): 1230m3/hr
Highly recommended ducting:
How Soler and Palau Acoustic Box Fans Work:
The Soler and Palau Acoustic Box Fan is a high quality intake/outlet fan for extracting old, stale air from your grow-space or for supplying it with fresh air. The fans are housed in a lightweight and strong metal casing with external ports for easy connection to ducting, filters, airsocks or other accessories. The fan itself is a “squirrel cage” type with the intake and outlet being inline. Acoustic insulation is used internally to keep noise to a minimum. The fan can be powered directly from the mains or via a fan-speed controller (not included) to control the fan-speed and air-flow. The Soler and Palau Acoustic Box Fans are very well-made and during use they are very quiet for the amount of air flow that they produce.
Using the Soler and Palau Acoustic Box Fan:
The Soler and Palau Acoustic Box Fan can be used to draw air out of your grow-space via a carbon filter such as CarboAir Carbon Filters or ducting. Insulated ducting or Phonic Trap ducting is highly recommended where noise is to be kept as low as possible. Inlet and outlet ducting should be attached to the vents with Duct Clips (not included). The Soler and Palau Acoustic Box Fan can be floor-mounted or mounted vertically or horizontally. Soler and Palau Acoustic Box Fan can either be connected directly to the mains or fed from a Fan Speed Controller via an IEC mains cable.
Do not under any circumstances put your fingers into the spinning blades of a fan, especially an in-line type. Even a small fan has enough power to cause severe injury and loss of fingers. Just don’t do it, no matter how tempted you are. Keep ducting runs as short as possible as every metre of ducting reduces the flow-rate that the fan can achieve. The more ducting attached, the lower the air-flow. Bear in mind that a carbon filter will reduce the air-flow that your fan can achieve by about 25% just on it’s own. When turning a corner with ducting try to create a swept bend rather than a sharp knee as this will reduce air-flow by the least amount and also help to keep wind-noise down.