Silenced Revolution Vector & CarboAir Filter Extraction - Phonic Trap Ducting
Designed to Match Each Other Perfectly, the Revolution Vector and CarboAir are an Unbeatable Combination - with Phonic Trap Ducting!
The Silenced Revolution Vector and CarboAir kit gives you everything you need for unbeatable extraction. The Silenced Revolution Vector is internally the same as the non silenced version but in an acoustic housing. It's manufacturer System Air has gone to ever effort to make this fan as quiet and efficient as possible. Silenced Vector fans move an incredible amount of air and are the result of years of testing and millions of pounds of research. Their frictionless EC motor allows regulation of the fan speed from 1-100% and massive energy savings in comparison to other fans. Unlike RVK fans, which output air at around 90 degrees, air exits the Silenced Revolution Vector in almost a straight line, making it travel much more efficiently down your ducting and create less noise along the way. Not only that, it's a single sealed unit so you can rest assured no smells will escape from your fan housing.
Until now carbon filter manufacturers have given you the choice between filters which either massively stifle your fan or inefficiently remove smells. The included CarboAir filters (Pro Grow Filters) offer thicker beds (60mm opposed to the industry average 50mm) of coarser, high quality carbon. This not only allows incredible air flow, it removes any possible traces of smells. Alongside this ultimate duo you will receive Phonic Trap Ducting, super-sleek insulation lined to remove any excess air movement noise from your extraction set up.
The kits are available in multiple sizes, please click the drop down to view available set ups. Use our handy guide below to figure out which is best for you.
- Buy any duct fan or extraction kit and get £40 off the G.A.S Enviro Controller!
- Silenced Revolution Vector and CarboAir, Designed to perfectly match each other
- Features a cutting edge frictionless EC motor
- Can be regulated from 1-100% - fine tune your environment
- Saves you money - uses 50% of the energy of other fans
- 60mm high quality coarse CarboAir carbon bed depth gives more contact time, offering unbeatable airflow and eradication of unwanted odours
- Sealed fan unit, ensuring no smelly air leaks from your fan
- Includes Phonic Trap Ducting, removing unwanted air movement noise from your extraction.
- All fittings and fixtures included
1 x Silenced Revolution Vector fan (choose your size from the drop down menu)
1 x 60mm Bed Depth CarboAir Filter (to match your choice of fan)
1 x 6m of Phonic Trap Ducting (or 1 x 10m box for the 12-inch kit)
1 x Fast Clamp
2 x Duct Clips (included in Phonic Trap Box)
1 x Terminator Cable (which allows you to run the fan without a controller)
Recommended additional purchase: Phonic Trap Quick Connection Kit
Which Size Kit Do I Need for my Grow Tent?
There exists a (relatively) easy formula to work out which size extraction you need for your space, find out the volume in m3 (meters cubed) of your grow space with Width x Length x Height = Volume. then, Volume x 60 = Air Movement Per Hour (this will refresh the air in your grow room every minute).
Silenced Revolution Vector fans have been designed specifically for the CarboAir filters and Systemair have gone to the trouble of measuring airflow with filter attached, please see the figures below. The drop off in airflow is much smaller than any other fan!
Bear in mind it's always better to over spec your fan and reduce its output with a controller, this gives you the flexibility to increase it's output to maintain optimum conditions for your plants, for example in the middle of summer.
Silenced Revolution Vector (EC) 150 (6") - 796m3/hr with 60mm bed CarboAir 150mm/660mm (655m3/hr airflow with filter)
Silenced Revolution Vector (EC) 200 (8") - 1332m3/hr with 60mm bed CarboAir 200mm/660mm (1005m3/hr airflow with filter)
Silenced Revolution Vector (EC) 250 (10") - 1822m3/hr with 60mm bed CarboAir 250mm/1000mm (1390m3/hr airflow with filter)
Silenced Revolution Vector (EC) 250-L (10") - 2077m3/hr with 60mm bed CarboAir 250mm/1000mm (1610m3/hr airflow with filter)
Silenced Revolution Vector (EC) 315-L (12") - 2163m3/hr with 60mm bed CarboAir 315mm/1000mm (1775m3/hr airflow with filter)
How the Silenced Revolution Vector (EC) & CarboAir Filter Extraction Kit Works
The extractor fan in your grow room removes hot, stale air and excess moisture from your grow room, which in turn draws fresh air in, controlling the environment and replacing CO2. If you're growing plants that have strong, unwanted odours, you're going to need to filter this air first before ducting it to an outside point. Your carbon filter attaches to your extractor fan - air gets sucked through an outer layer of mesh and through an internal layer of carbon before passing through your extraction system. It then leaves clean and free of any odours, keeping unwanted smells locked firmly inside the grow space.
How to Use the Silenced Revolution Vector (EC) & CarboAir Filter Extraction Kit
Before connecting to a power supply, join the fan and carbon filter together using the fast clamp, ensuring that the fan is placed so that, when powered-up, it will be drawing air through the filter. There are hanging attachments on either side of the fan to help position the fan and filter easily. Rope ratchets make a great additional purchase: they’re perfect for supporting larger items, and, hanging fans in this way helps to lower vibration and reduce noise. Bungee cords are another tried-and-tested way to support your fan and filter and achieve similar results. Always position the fan and filter high-up in your grow space, in order to remove hot air as it rises, helping to control your grow area’s temperature. Place one end of the Phonic Trap ducting onto the outlet side of the fan and secure it into place using the duct clip. The ducting should then be placed so that it runs to a suitable outlet point, preferably to an outside area.
Keep the layout of your Phonic Trap ducting simple, forming the shortest, straightest route to an outside area possible. Following this advice will lower air-resistance and allow you to get as close to 100% efficiency as is achievable. Ducting arrangements that are too long or have too many bends will create unnecessary noise and lower the effectiveness of your extraction. Putting a little time and effort into planning this aspect of your grow will pay dividends, helping to keep the air that your plants depend on as fresh as possible.
The high-torque motors on these duct fans are incredibly powerful, so under no circumstance should you ever put your fingers anywhere near the fan blades when they are operational. Doing so will almost certainly result in serious injury.