Red Scorpion Carbon Filters
  • All
  • 300000   4 inch
  • 300010   5 inch
  • 300020   6 inch
  • 300030   8 inch
  • 300070   12 inch %28600mm%29
  • 300080   12 inch %281000mm%29

Red Scorpion Carbon Filters

SKU:

Choose your filter size:

4" (100mm/300mm) (Out of Stock)

£39.95 £34.95
Red Scorpion Carbon Filters
  • All
  • 300000   4 inch
  • 300010   5 inch
  • 300020   6 inch
  • 300030   8 inch
  • 300070   12 inch %28600mm%29
  • 300080   12 inch %281000mm%29

Take the Sting Out of Your Growroom Odour Problems with Red Scorpion Carbon Filtration

Red Scorpion Carbon Filters are manufactured using the finest virgin Australian carbon and are of exceptional quality dispite their low price point.

  • Removes particles and odours from your grow-room
  • Made with 100% RC412 Australian virgin activated carbon
  • Red tinted, aluminium housing provides robustness while remaining light weight
  • Custom mesh for greater air flow
  • Perfectly matches RVK duct fans and many more
  • Come in a range of sizes to suit every grow room

Contains

Your choice of size of Red Scorpion Carbon Filter (choose your size above)

How Red Scorpion Carbon Filters Work

Red Scorpion Carbon Filters are based around a aluminium cylinder, containing a fine granular form of carbon called “activated carbon”. Each grain of the virgin Australian RC412 activated carbon has a highly porous surface, giving it a huge surface area relative to its small size. Activated carbon inside the Red Scorpion Carbon Filters has the ability to clean and de-odorize all air that is passed through it. It does this by attracting and then trapping impurities and aromatic substances on its surface, thereby cleaning the air being passed through it, before being released into the open air.

How to use the Red Scorpion Carbon Filters

Red Scorpion Carbon Filters should be matched to the fan that they are being used with in terms of their diameter and air flow rate. If the air-flow rate of the fan is too high for the filter then the air will flow through it too quickly to be cleaned properly. Also, if the vent diameters of the fan and the filter are different then it will not be possible to connect them without the use of a ducting reducer or enlarger.

Before use, the plastic wrap should be removed from around the outside of the drum and then the supplied dust filter sleeve should be fitted over the outside.

The Red Scorpion Carbon Filter needs to mounted inside or as close as possible to your grow-space and connected to your extractor fan by means of ducting and Duct Clips or a Fast Clamp which joins the filter and the fan directly together. However they are fitted together it is essential that all joins are airtight for the fan and filter system to work effectively.

Red Scorpion Carbon Filters are designed to be fitted to the intake side of your extractor fan and should never be fitted to the outlet side. In other words air must be sucked through them and never blown out through them. Blowing air through them will make them ineffective and may even damage them internally. The dust-filter around the outside should be removed and washed when it gets dirty in order to maintain air flow.

Look for similar items