Ram Ultrasonic Humidifier - 5 Litre
Ram Ultrasonic Humidifier
As plants transpire, they lose water through their stomata (small openings on leaf surfaces). If the moisture levels in the surrounding atmosphere are too low, then the volume of water released by plants through their stomata will be higher, which can have very negative impact (wilting, stress and poor health). Boosting the level of moisture in the atmosphere, when necessary, will have a huge impact on plant growth and vitality.
The Ram Ultrasonic Humidifier adds a fine mist of water into your growing environment, boosting humidity. It's incredibly easy to set up, literally plug it in, fill the reservoir and your good to go, not only that it looks awesome too! Don't let your environment be less than optimal, investing in the Ram Ultrasonic Humidifier will pay you back with healthy, bountiful crops.
- 400ml per hour diffusion
- Prevent dryness in your growing environment
- Large 5 litre capacity will give you hours of humidification
- The right levels of humidity keeps plants in optimum condition
- Auto cut-off prevents damage when your reservoir becomes empty
- Only 30w of power usage
How to use the Ram Ultrasonic Humidifier:
The Ram Ultrasonic Humidifier is incredibly easy to use, after taking it out of the box you just need to fill the reservoir, plug the unit in and turn the unit on by setting your desired humidity level using the control on the front. Always remember that the Ram Ultrasonic Humidifier requires cool or filtered water, don't use hot water, you'll break it.
We would always recommend using RO water -- tap water will, when used frequently, deposit minerals which can slightly reduce the effectiveness of your reflector and grow room equipment. If you are going to use this unit with regular tap water don't panic, we would recommend replacing your reflector every 12 months to compensate for any losses.
It should be noted that the Ram Ultrasonic Humidifier is designed for use with water that has been filtered through a reverse osmosis unit. Filtering water removes excess salts that can damage internal components and cause issues in your growroom. These salts can even corrode your reflectors, causing a drop in yields. If you wish to use this unit with unfiltered water, you do so at your own risk. We cannot except returns and the manufacturers will not send out a replacement.