Luxx Lighting - Luxx 315w CMH
  • 92753   main
  • 92753   side
  • 92753   underside
  • 92753   rear
  • 92753   light on

Luxx Lighting - Luxx 315w CMH

SKU: 92753
£324.95
Luxx Lighting - Luxx 315w CMH
  • 92753   main
  • 92753   side
  • 92753   underside
  • 92753   rear
  • 92753   light on

Designed In Los Angeles, Cultivated Worldwide.


Please Note - This is purchase to order, give us a call to learn more on 01782 749955


Luxx Lighting is a group of hands-on, southern California cultivators that believe, “If you don’t do it, you don’t know it”. They are constantly testing, and when they find what works best, they challenge themselves to make it better. They design products based on data and performance. As the technology changes, they will continue to be innovative in lighting the path ahead.

  • Low-frequency squarewave technology
  • Over 98% high reflective aluminum reflector
  • Operates on a 120/208/240v power supply
  • 10ft 240V power cord (NEMA 6-15P)
  • Controller compatible (SOLD SEPARATELY)
  • 315W CMH Luxx Lamp 4200K Full Spectrum Veg/Flower lamp included
  • 3 Year warranty for peace of mind

Contains

1 x Luxx 315w CMH & 3m Power Cable

Recommend Additional Purchases

CarboAir Rope Ratchet Hangers

Method Seven - Cultivator HPS+ Grow Room Glasses

How The Luxx 315w CMH Works

The Luxx Lighting 315W CMH fixture utilizes Low-Frequency Squarewave technology. The Luxx 315w CMH delivers full-spectrum light with a Color Rendering Index (CRI) of >97. Simulating natural sunlight and allowing your plants to develop to their full genetic potential.

How To Use The Luxx 315w CMH

Simply hang the reflector with the ballast attached and lamp inserted over the centre of the grow-space at an appropriate height using easy rolls, rope ratchet hangers or jack chain. Always screw the lamp into the lamp-holder in your reflector as tightly as possible by gripping the lamp with a clean, dry cloth. If the lamp is not screwed in as tightly as possible, arcing can occur between the centre contact of the lamp and the lamp-holder. This melts the solder contact on the bottom of the lamp, causing damage and making it un-usable. Make sure that the lamp is clean and completely free of fingerprints and other contaminants.

Connect the input lead of your reflector to the output lead of the ballast ensuring the cable is not pulled tight and does not encounter anything hot (e.g. lamp, reflector, ballast).

The wattage of your ballast MUST match the wattage of the lamp you are using or there will be a high risk of fires or equipment damage. Only use the Horizon Connect ballast that comes with this kit for firing up the CDM lamps. Never use a HPS or MH ballast with CDM lamps. Connect the mains plug into an electrical outlet socket and switch on. The ballast will start-up and light the lamp.

PLEASE NOTE: The 315w CDM lamps need to be bedded in as follows: on first illumination the lamp needs to be run continuously for a minimum of 15 minutes. This will allow the metals within the lamp to fuse correctly.

FAILURE TO DO THIS WILL RESULT IN LAMP FAILURE!
If the above is not adhered to, lamp warranty claims will be void.

Warning: When CDM HID (High Intensity Discharge) lamps are switched on they run extremely hot. As with all HID lamps it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular, avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.

 

 

 

Look for similar items