Luxx Lighting - Luxx 630w CMH
Designed In Los Angeles, Cultivated Worldwide.
Please Note - This is purchase to order, give us a call to learn more on 01782 749955
Luxx Lighting is a group of hands-on, southern California cultivators that believe, “If you don’t do it, you don’t know it”. They are constantly testing, and when they find what works best, they challenge themselves to make it better. They design products based on data and performance. As the technology changes, they will continue to be innovative in lighting the path ahead.
- Over 95% high reflective aluminum
- Operates on a 120/208/240v power supply
- 10ft 240V power cord (NEMA 6-15P)
- Controller compatible (SOLD SEPARATELY)
- 2 x 315w full spectrum CMH bulb
- 3 Year warranty for peace of mind
1 x Luxx 630w CMH & 3m Power Cable
Recommend Additional Purchases
How The Luxx 630w CMH Works
The Luxx 630w CMH fixture can be used by the hobbyist or the commercial cultivator alike. The CMH 630 runs cool enough to be used in a low ceiling tent application, or at scale in a 200 light mother room. The CMH 630 is equipped with dual 315w 4200k 90+ CRI lamps, that produce a strong healthy plant structure and reduce shock during the transition into the flower cycle.
How To Use The Luxx 630w CMH
Simply hang the reflector with the ballast attached and lamp inserted over the centre of the grow-space at an appropriate height using easy rolls, rope ratchet hangers or jack chain. Always screw the lamp into the lamp-holder in your reflector as tightly as possible by gripping the lamp with a clean, dry cloth. If the lamp is not screwed in as tightly as possible, arcing can occur between the centre contact of the lamp and the lamp-holder. This melts the solder contact on the bottom of the lamp, causing damage and making it un-usable. Make sure that the lamp is clean and completely free of fingerprints and other contaminants.
Connect the input lead of your reflector to the output lead of the ballast ensuring the cable is not pulled tight and does not encounter anything hot (e.g. lamp, reflector, ballast).
The wattage of your ballast MUST match the wattage of the lamp you are using or there will be a high risk of fires or equipment damage. Only use the Horizon Connect ballast that comes with this kit for firing up the CDM lamps. Never use a HPS or MH ballast with CDM lamps. Connect the mains plug into an electrical outlet socket and switch on. The ballast will start-up and light the lamp.
PLEASE NOTE: The 315w CDM lamps need to be bedded in as follows: on first illumination the lamp needs to be run continuously for a minimum of 15 minutes. This will allow the metals within the lamp to fuse correctly.
FAILURE TO DO THIS WILL RESULT IN LAMP FAILURE!
If the above is not adhered to, lamp warranty claims will be void.
Warning: When CDM HID (High Intensity Discharge) lamps are switched on they run extremely hot. As with all HID lamps it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular, avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.