Optilux 600w Dimmable Digital Ballast
  • Main shot
  • Optilux angled
  • Optilux ballast box
  • Optilux ballast relative to hand
  • Optilux iec input ballast
  • Optilux box and ballast
  • Optilux female iec connector
  • Optilux lead connector close up
  • Optilux output knobs
  • Optilux power cable 1.5m
  • Optilux sideways

Optilux 600w Dimmable Digital Ballast

SKU: 92741
£55.95
Optilux 600w Dimmable Digital Ballast
  • Main shot
  • Optilux angled
  • Optilux ballast box
  • Optilux ballast relative to hand
  • Optilux iec input ballast
  • Optilux box and ballast
  • Optilux female iec connector
  • Optilux lead connector close up
  • Optilux output knobs
  • Optilux power cable 1.5m
  • Optilux sideways

A Digital, Dimmable 600w Ballast with Quality Components for an Incredibly Low Price!

The Optilux delivers many of the features you'd expect from a high-end ballast, for a fraction of the price. With 250w, 400w, 600w and X-Boost settings, the Optilux is highly adaptable, and it can be used with both high-pressure sodium and metal halide lighting. It's lightweight, produces minimal heat, and comes with a sleek and stylish finish. For peace of mind, it also utilises soft start and thermal protection technology to prevent energy spikes from damaging either your lamp or the ballast itself.   

  • Incredible 600w performance for a low price
  • Features high-quality and extremely reliable internal components
  • Provides four lighting options in one ballast: 250w, 400w, 600w and a 660w X-Boost
  • Runs cool while producing more efficient and consistent lighting than a traditional magnetic ballast
  • Soft start and thermal protection to prevent energy spikes and damage to both your lamp and ballast
  • Virtually silent operation with in-built hanging brackets for easy wall mounting
  • Capable of running either HPS or MH lamps
  • Lightweight, sleek and elegant design

Contains

 

1 x Optilux Digital Dimmable 600w Ballast with moulded IEC connection
1 x 1.5 metre lead with moulded UK plug

Voltage: 220V - 240V

How the Optilux Ballast Works

The Optilux digital ballast converts mains electricity to the correct voltage and current to start-up and power a 250, 400, 600w HPS or MH lamps. By using the X-Boost feature, you can achieve 660 watts of power, further pushing your plants to their full potential. It produces more lumen output, use less electricity and does not degrade with age like core and coil type magnetic ballasts, which become noisy, use more electricity and produce less lumens as they age. The Optilux features both soft start, which regulates the power flow to your lamp at a steady rate and thermal protection, which protects your lamp and ballast in the event of a power spike or drop in energy supply.

Why Upgrade to Digital?

As great as magnetic ballasts have been there are many reasons to upgrade to a digital ballast. They produce less heat, weigh less and are virtually silent unlike magnetic ballasts, meaning they can mounted much easier, won't give off as much heat as their magnetic counterparts (allowing you to add lights to your grow room) and remain incredibly discreet. Digital ballasts are more efficient, generating more lumens of light for the same power drawn, in comparison to a magnetic ballast of the same wattage, they also maintain peak performance even as the lamp ages. All these factors stack up to healthier plants with larger harvests, for a slight increase in initial outlay that will pay for itself in next to time.

How to Use the Optilux 600w Digital Ballast

Although this ballast runs fairly cool in use, it should still be located on a flat, firm, surface (not carpet) and in a well-ventilated location. It should never be covered and there should be no combustible items in the vicinity just in case. Connect the input lead of your reflector to the output lead of the ballast ensuring the cable is not pulled tight and does not come into contact with anything hot (e.g. lamp, reflector, ballast). Ensure your lamp is tightly screwed into the bulb-holder and that your reflector is at the correct height.

Use the power-output switch to select the desired output wattage. 250-watt lamps can only be used at 250 watts. 400-watt lamps can be used at 400 watts or turned down to 250 watts. 600-watt lamps can be used at 600 watts or turned down to 400 watts or 250 watts. The Optilux 600w ballast can be used on the “overdrive" setting which increases the output by 10%, increasing the light produced by the lamp. Once the correct output wattage has been selected, connect the mains plug into an electrical outlet socket and switch on. The ballast will start-up and light the lamp.

Look for similar items