Hyper Fan & Rhino Pro Filter Extraction Kit - Combi Ducting
Featuring the Redesigned V2 Hyper Fan, for Greater Airflow and Higher Static Pressure
V2 Hyper Fans move even more air than the originals, and they do so while using very little power, so they'll save you an absolute fortune on your energy bills. They come in compact, stylish, lightweight steel casings that make them a doddle to hang. V2 Hyper Fans can also be used with a larger selection of fan controllers (see below for more info). Switch to digital fans and you won't look back.
- Buy any duct fan or extraction kit and get £40 off the G.A.S Enviro Controller!
- Built with powerful, 9-pole, electronically commutated (EC) motors
- Generates extremely high static pressure levels
- Pays for itself by delivering ridiculously high levels of airflow per watt of electricity
- Lightweight aluminium fan housings - a doddle to hang
- Now controllable from 0% to 100%
- Comes with a Rhino Pro Filter - one of the best in the industry
- Two-year manufacturer's warranty on the Hyper Fan
- Combi Ducting included - lightproof and made to last
- Supplied with fast clamp and duct clip for an ultra-secure connection
Please note: V2 Hyper Fans are not compatible with Multi Phase Hyper Fan Controllers.
Which Size Kit Do I Need for My Grow Tent?
Find out the volume of your grow space in cubic metres: width x length x height = volume
For example: 1.2m x 1.2m x 2.0m = 2.88m3
You'll need to have the capacity to replace this volume of air once per minute. Multiply the volume figure by sixty to work out the airflow needed per hour.
2.88m3 x 60 = 172.80m3
Carbon filters add some extra load to your fan. To account for this, multiply the required airflow by 1.2, which will give you some spare capacity.
172.80m3 x 1.2 = 207.36m3
Note that it is always better to over-spec your fan and regulate it with a controller. This gives you the flexibility to increase output levels if temperatures rise.
6" (150mm) 560m3/hr (Hyper Fan) with 150mm/300mm Rhino Pro Carbon Filter
8" (200mm) 1230m3/hr (Hyper Fan) with 200mm/600mm Rhino Pro Carbon Filter
10" (250mm) 1840m3/hr (Hyper Fan) with 250mm/1000mm Rhino Pro Carbon Filter
How the Hyper Fan & Rhino Filter Kit Works
This kit includes a V2 Hyper Fan, which improves on the original Hyper Fan by delivering even greater levels of static pressure, increased airflow and a higher degree of controllability (from 0% to 100%). V2s are also compatible with a larger selection of controllers, which now includes the EC Fan Speed Controller, EC1 and EC5.
Rhino Filters utilise RC412 Australian virgin activated carbon, which is widely regarded as the best available. They're also designed with 51% open area meshing, which optimises air flow, putting less drag on your fan (not that it's too much of an issue for the V2 Hyper Fan!). You'll get two years out of a Rhino Pro before it needs replacing, unlike cheap and nasty knock-offs that start to degrade within weeks...
Combi ducting is provided as standard, which is more robust than regular aluminium ducting and also fully lightproof.
How to Use the Hyper Fan & Rhino Filter Kit
You can find more information on setting up extraction systems by checking out the "How to Set Up Grow Tent Ventilation" post at the One Stop Grow Shop Blog.