Hydrozone AM237H Adjustable In-Room Ozone Generator With Built In Timer
Hydrozone AM237H In-Room Ozone Generator
Ozone neutralises odours and inhibits moulds and bacteria in the air. The Hydrozone AM237H produces an adjustable amount of ozone to help keep the air fresh and clean in areas up to 3000 cubic feet (100 cubic metres). Great for keeping grow-rooms free of infections and eradicating smells.
- Hydrozone AM237H – for use inside a grow-room
- Produces an adjustable amount of ozone - 2mg – 70mg per hour
- Built-in programmable digital timer
- Drastically reduces odours
- Inhibits mould and bacterial infections
- Incredibly effective in rooms up to 3000 cubic feet (100 cubic metres)
1 x Hydrozone AM237H In-Room Ozone Generator and wall fixings
How the Hydrozone AM237H In-Room Ozone Generator works:
The Hydrozone AM237H In-Room Ozone Generator is a great little ozone generator that uses a small coronal discharge plate to produce ozone. The Hydrozone AM237H can be adjusted to produce from 2mg to 70mg of ozone per hour. The Hydrozone AM237H then uses a fan to release and spread the ozone into a room. When ozone is released into a room, it neutralises odours, bacteria and mould spores that it comes into contact with, making the air considerably cleaner and fresher-smelling. The Hydrozone AM237H is highly effective in a room up to 3000 cubic feet (1000 cubic metres) in size. The Hydrozone AM237H also incorporates a programmable digital timer so that the unit can be easily timed to come on and go off whenever required.
How to use the Hydrozone AM237H In-Room Ozone Generator
Ozone is heavier than air and for this reason the Hydrozone AM237H should be placed on a shelf or mounted in a location which is as high up as possible within the room in which it is to be used. The location of the Hydrozone AM237H should ideally be on the opposite side of the room to the extraction system. Fittings are provided so that it can be mounted high on a wall. Ensure that the area around the Hydrozone AM237H is not obstructed, and that air can flow into, out of and around the unit freely. Using the key provided, open the unit and mount one of the supplied coronal discharge plates into the clips on either side of the fan. Using a screwdriver, turn the adjustment control to the required output level, between 2mg – 70mg per hour. The minimum output of 2mg/hour is generally sufficient for a room that is 300 cubic feet (10 cubic metres) in size or less. The maximum output of 70mg/hour is generally sufficient rooms that are about 3000 cubic feet (100 cubic metres) in size. The unit can be set to any output level to suit any size room between these two sizes. The amount of times per hour that your extraction system changes out the air in the room will also affect the amount of ozone that will need to be produced. Plug the unit into a convenient mains socket and switch on. The digital timer can now be programmed as described in the instruction manual. The Hydrozone AM237H will now produce ozone and release it into the room according to the schedule programmed into the timer, neutralising odours, mould and bacteria from the air.
The Hydrozone AM237H is incredibly effective at reducing odours. However, it is NOT a replacement for a filter and extraction fan which should still be used to remove stale air from your grow-room.
Warnings: Do not inhale the air from directly in front of the generator as this will be very rich in ozone and therefore could be a hazard to health. It is a wise precaution to switch the Hydrozone AM237H off for 30 minutes to an hour to allow ozone levels to fall prior to working in your grow-room. Children and animals should be kept out of any area which may contain elevated levels of ozone.