Ex-Display RVK Sileo 200E2-L (L1) 8-Inch (200mm) In-line Duct Fan (1008m3/hr)
  • Ex display 91412
  • Ex display 91412 1

Ex-Display RVK Sileo 200E2-L (L1) 8-Inch (200mm) In-line Duct Fan (1008m3/hr)

SKU: EX DISPLAY 91412
£114.95 £99.95
Ex-Display RVK Sileo 200E2-L (L1) 8-Inch (200mm) In-line Duct Fan (1008m3/hr)
  • Ex display 91412
  • Ex display 91412 1

PLEASE NOTE - THIS IS AN EX-DISPLAY ITEM AND HAS A FEW FAIRLY MINOR MARKS AND SCRATCHES AND NO BOX OR INSTRUCTIONS. HOWEVER, IT IS FULLY WORKING. Please remember to order a mains lead (if you require one) from the links below.

Ex-Display RVK Sileo 200E2-L (L1) 8-Inch (200mm) In-line Duct Fan (1008m3/hr)

The Systemair RVK range of In-line Duct Fans are ideal for removing old air or supplying fresh air to your grow-space. Systemair fans are of excellent quality and are amazingly reliable.

  • Systemair – Top In-line duct fan manufacturer
  • Removes stale air from your grow-space
  • Can be used to supply fresh air to your grow-space
  • Can be used with 8-inch (200mm) ducting, carbon filters etc.
  • 8-inch (200mm) fan - ideal for medium-large size grow-spaces
  • Powerful – large air-flow for it’s size – 1008 m3/hour
  • Quiet – only 41.9 dB
  • Maintenance-free and highly reliable

The Ex-Display Systemair RVK Sileo 200E2-L (L1) Contains:

1 x Ex-Display Systemair RVK Sileo 200E2-L (L1), 1 x bracket

The Systemair RVK will require the fitting of an electrical cable (not supplied). See the links below for appropriate cables in 2m and 5m sizes:

2 Metre Mains Lead (3-Core Black) With Moulded 5 Amp Plug & Stripped Ends

5 Metre Mains Lead (3-Core Black) With Moulded 5 Amp Plug & Stripped Ends

How the Systemair RVK Sileo 200E2-L (L1) Works:

The Systemair RVK 8-inch (200mm) L1 In-line Duct fan is a high quality intake/outlet fan for extracting old, stale air from your grow-space or for supplying it with fresh air. The fans are housed in a lightweight yet robust fibreglass and plastic casing with external ports for easy connection to ducting, filters, airsocks or other 8-inch (200mm) diameter accessories. The fan can be powered directly from the mains or via a fan-speed controller (not included) to control the fan-speed and air-flow. Systemair RVK fans are very well-made and reasonably quiet during use. A bracket is included for ease of mounting.

Using the Systemair RVK Sileo 200E2-L (L1):

Systemair RVK fans can be used to draw air out of your grow-space via a carbon filter or just ducting. The fan can be mounted in the required location using the bracket provided. Many users prefer to use bungees to hang the fan from, which usefully reduce noise and vibration. The fan should be mounted so that the required air-flow direction matches the arrow mark on the casing. On the output side of the fan, slide your 8-inch (200mm) ducting over the outlet sleeve and secure it in place with a Duct Clip (not included). Repeat for the inlet side or a fast-clamp can be used to connect the fan directly on to a 8-inch (200mm) carbon filter. If a carbon filter is to be fitted it is important that the filter is rated at a similar air-flow as the fan. An electrical feed to the fan is required which can be directly from the mains or via a fan-speed controller. This should be performed by an electrically competent person. A downloadable wiring diagram can be found under the "Attachments" tab above this description. Be sure the diagram is followed closely.

Do not under any circumstances put your fingers into the spinning blades of a fan, especially an in-line type. Even a small fan has enough power to cause severe injury and loss of fingers. Just don’t do it, no matter how tempted you are. For RVK fans, follow the wiring diagram on the case moulding, do not match up the wire colours to the wires inside as they follow the European wiring code. Keep ducting runs as short as possible as every metre of ducting reduces the flow-rate that the fan can achieve. The more ducting attached, the lower the air-flow. Bear in mind that a carbon filter will reduce the air-flow that your fan can achieve by about 25% just on it’s own. When turning a corner with ducting try to create a swept bend rather than a sharp knee as this will reduce air-flow by the least amount and also help to keep wind-noise down. To further keep wind-noise down to a minimum, stretch flexi-ducting out as much as possible or use acoustic ducting.

Rated air-flow: 1008 m3/hour

Noise level: 44.9 dB

Power consumption: 153 Watts

Current draw: 0.625 Amps

Weight: 3.8 Kg

Look for similar items