Canatronics Contactors with Grasslin Timer
Canatronics Renegade Contactors with Grasslin Timer
Plants are incredibly sensitive to changes in lighting schedules, so it’s really important to make sure your lights are switched on and off at the right time. Canatronics units are renowned high-quality, ultra-reliable contactors that can handle up to 4800 watts of equipment. Canatronics are the original name in reliable contactors and have been used by growers for years. Hand built in England, they contain the infallible heavy duty Grasslin Timer and a dedicated auxiliary heater output.
- 4000 Watts total load (Canatronics 8 way up to 4800 watts)
- Easy to use
- Dedicated auxiliary heater output
- Features an integral Grasslin timer
- HO7RNF fire resistant cabling
- Wall mountable with attached brackets
- Housed in a tough metal box
Canatronics Renegade Contactors Come in Two Sizes:
How the Canatronics Renegade Contactor Works:
Most plug-in timers available on the market today will fail if they are used to switch on and off a load such as a grow-light ballast. The Canatronics Contactors with Grasslin Timer will safely and reliably switch on grow-lights (and/or fans etc.) by means of highly rugged internal electrical switching components using the schedule that you set on the integral Grasslin timer on the top. The heater is circuited to come on when your light timer is off to offset the lack of heat keeping your plants in the ideal environment. The Canatronics Contactors with Grasslin Timer will switch 1 to 8 lighting ballasts or other electrical equipment with a total power consumption of up to 4000 Watts or up to 4800 Watts on the 8 way version. Grasslin are very well known for making some of the most reliable timers in the industry. It’s all housed in a sturdy metal casing.
How to Use the Canatronics Renegade Contactor:
The Canatronics unit can be hung from a wall by the attached fixing bracket. With the unit unplugged, programme the timer on the front by moving the tabs on the face of the Grasslin timer to the outer position for those times that you would like power to be on, and set the others to the inner position for the times you would like the power to be off. Each segment corresponds to 15-minutes. A pencil or other small item can be handy for pushing the segments in or out with.
Move the timer-face clockwise until the current time lines up with the arrow. The hands on the clock in the centre will then also correspond to the correct time. There is an override switch to the lower-right side of the clock. This can be set to "0" for "Always Off" or it can be set to "1" for "Always On". The centre position of the switch is for "Timed On" and this will be the normal setting for the unit when it is in use to switch your lights on and off according to your set programme.
Plug your ballasts, fans or other electrical items to be switched, into the sockets on the Canatronics Contactor Switching Unit. Make sure that the switches on the outlets are in the "On" position. Insert the rubberised mains plugs into separate mains outlets. Ensure the timer override switch is in the middle position. The contactor will now switch your lighting system on according to the programme set on the timer. Really no more than 8 lights should be switched by the Canatronics 8 Way Contactor with Grasslin Timer nor should more than 4800 Watts be drawn through it as this will cause the unit to be overloaded. The same can be said for the 6 way and 4 way versions, 6 lights for the 6 way and 4 lights for the 4 way only with a maximum load of 4000 Watts total.
Although Canatronics Contactors with Grasslin Timer can handle the switching of up to 4000 Watts or 4800 Watts on the 8 way version, it is worth bearing in mind that traditional (non-digital) HID lighting ballasts draw a considerable surge at switch-on which is well more than their normal running wattage. 4,6 or 8 traditional lighting ballasts being switched on simultaneously may cause the circuit breaker in your consumer unit to trip if that circuit is being run too close to its limit.
All Canatronics Renegade Contactors come with a 2 year manufacturers warranty as long as it has not been tampered with or altered in any way.