BudBox Pro - Pitched Roof - 1.5m x 1.5m x 1.8m - Loft Grow Tent
BudBox Pro XL-R - A Superbly Constructed, Durable Premier Grow Tent of the Highest Order!
The BudBox Pro tent range is the bigger, beefier brother of the BudBox Lite featuring a stronger framework to support more weight, metal click-lock connectors to keep the whole tent stable and sturdy, high quality tent fabric with precision stitching to keep light inside at all times. A green tinted viewing window lets you keep a close eye on your growing environment while eliminating any potential light leaks. In short, the BudBox Pro grow tent is a premium grade grow tent that puts all other grow tents in the shade.
The pitched roof BudBox grow tents mean that spaces too tight to fit traditional square grow tents aren’t wasted. Perfect for people looking to utilise lofts, attics and rooms with pitched roofs.
- Perfect for use with a 400 - 600w grow light
- BudBox Pro - superbly designed and constructed, premier grow tents
- Strong, powder-coated 25mm steel framework
- Metal, click-lock connectors for enhanced structural strength and long-term stability
- Creates a sealed area that locks in light, smells and sounds
- Tough, thick, durable yet lightweight outer shell that's easy to fit in minutes
- Intake and extraction ports with tightening drawstrings attached, large enough for acoustic ducting
- Military-grade, high-quality zips with ground level irrigation port
- Green tint viewing window, keep a close eye on your growing environment without unzipping the door
- Large ventilation panel/s for increased passive air flow
- Available in white or silver lining, check out our Grow Tent Blog to see which one is right for you
1 x Carry bag
1 x White or silver lined fabric tent
7 x Upright poles
8 x Horizontal bars
3 x Pitched roof bars
2 x Roof bars
4 x Corner pieces
4 x 4-way connectors
3 x 3-way connectors
2 x Hanging rails
4 x Plastic hanging rail covers
2 x Hanging straps
1 x Waterproof spill-tray
150cm x 150cm x 180cm
Pole thickness: 25mm rolled steel
Connector pieces: Rolled steel
Ventilation panels: 2 (64cm x 25cm)
Viewing window: Yes
Irrigation bar and port: Yes (1 x irrigation bar, 1 x irrigation port)
Intake ports: 2 (20cm diameter)
Extraction ports: 2 (20cm diameter)
Cable ports: 4 (10cm diameter)
Cooltube ports: 2 (16cm diameter)
Doors: 2 (front doors that zip all the way around to the sides)
Fancy a complete grow kit? Check out our BudBox Complete grow kits range.
Please Note: This tent is 1.5m x 1.5m x 1.8m (180cm) from the floor to the very top of the tent. The shoulders at the sides are 1.4m (140cm) from the floor.
How the BudBox Pro Works:
BudBox tents are widely regarded as the best in the industry, but that hasn't stopped their development team from making improvements. The Pro range features design tweaks and improvements that will make your growing experience that bit richer!
A Stronger Framework
Metal Corners and 25mm click-lock poles for a framework that's as strong as anything else on the market - easily capable of supporting your grow room equipment (and then some!). All poles and bars are powder-coated, drastically reducing the chances of corrosion.
Check your Plants Safely
Every tent in the Pro range has its own 14" x 10" viewing window. This allows you to check on your plants without opening the door and disturbing their environment. The window even has a transparent green filter on it - this is because light in the green area of the spectrum has no effect on plants' light cycles. This means that you can look through the window and check on your plants at any time of day without negatively affecting them.
Improved Fabric Outer
One of the things that made the original BudBox range such a hit was the quality of the fabric outer. The new outer, however, is even tougher and more durable than the original! It's also a hell of a lot lighter, making the tent quicker and easier to erect and dismantle than the original range, while sacrificing none of its robustness.
Easy Access For Your Watering System
BudBox Pros of 1.2m square and above come with an access point for your automated watering system (Autopots, IWS, etc). You can then keep the tank to your system outside the tent itself and feed the pipes along the floor and into the tent through one of the handy irrigation socks at the bottom of the tent's outer shell.
Which size fan and filter do I need for my Grow Tent?
There exists a (relatively) easy formula to work out which size extraction you need for your space. Find out the volume in m3 (metres cubed) of your grow space with Width x Length x Height = Volume. Then, using that figure do, Volume x 60 = Air Movement Per Hour (this will refresh the air in your grow room every minute).
If you are using a filter (which you are), then Air Movement Per Hour x 1.2 = the amount of air your fan will need to move. Use the figures below to match up your space to your preferred fan and filter combo! Check out our range of Extraction Kits and Digital Extraction Kits to find your perfect ventilation system..
Bear in mind it's always better to over spec your fan and reduce its output with a controller, this gives you the flexibility to increase its output to maintain optimum conditions for your plants, for example in the middle of summer.
How to use the BudBox Pro
Setting up your grow tent is a very quick and easy process. First, you'll need to construct your framework as shown on the supplied instruction sheet. Then you'll need to unfold and unzip the fabric outer. Look for the bottom area of the fabric outer and fit it to the bottom of the tent frame. Once it's secured, you can then pull the rest of the outer up and over the top of the frame. A copy of the instruction sheet can be found in the attachments section, just below this description.