Autopot XL System Kits (1-60 pot)
All-in-One Autpot XL Bundles
Autopots are an easy-to-use nutrient delivery system. Plants are gravity fed from a reservoir – no pumps or items of electrical equipment are required. Instead, Autopots rely on the simple genius of their Aquavalve system to distribute feed to root systems as and when they need it.
- Autopots – simple and effective!
- 25 litre containers to provide lots of space for developing roots
- Produces amazing results, particularly with coco coir
- Extremely low maintenance
- Features the ingenious Aquavalve
- Great for beginners – very easy to use
- An extremely popular system – tried and tested
- No pumps are required, and for this reason, no timers are necessary
- Each kit comes with a reservoir tank, which includes a lid and grommet. The 1, 2 and 4-pot kits come with a 47L tank; 6, 8, 9 and 12-pot kits come with a 100L tank; 16, 24-pot kits come with a 225L tank; 36 pot kit comes with a 400L kit; 48 and 60 pot kits come with a 750L tank.
- XL Autopot system (includes 25 litre Autopot/s, tray, Aquavalve, root control disc and 6mm of flexi pipe). The systems come in sizes of 1, 2, 4, 6, 8, 9, 12, 16, 24, 36, 48, and 60, depending on how many pots you require.
- Inline tap
- Tank filter (includes membrane)
- Cross/tee connector and fittings
How the Autopot XL System Kits Work
Out kits come with all the equipment, and necessary fittings needed to set up your entire system - making the entire process incredibly simple and hassle-free! The pots have an amazing 25 Litre growing capacity, and are perfect if you're looking for massive yields, with half of the effort.
Autopots are a great way to supply your plants with the nutrients they require, without ever having to use pumps or other electrical equipment. Instead, Autopots rely on gravity and the ingenious Aquavalve to distribute nutrients as and when they are needed. Because of this, Autopot kits are simple to install and very user friendly.
Aquavalves fill trays up to the standard level of 20mm. Once this nutrient has been absorbed and the tray is empty, the Aquavalve automatically refills it back up to the 20mm level using an ingenious float valve system. Fresh nutrient solution is only ever delivered once root systems have absorbed the previous 20mm of feed.
Because Autopots are fed from underneath, they require a medium that is able to absorb liquid effectively, 'sucking' it up to the upper regions of the container and creating an even spread of nutrient. Coco coir ticks these boxes, making it the best performing medium we've tested for use in Autopot systems. It's also advisable to mix growing mediums with perlite or clay pebbles, up to a ratio of around 1 part medium to 1 part perlite/clay pebbles, particularly when using heavier potting soils. Even coco grows benefit when the medium is mixed with perlite at a rate of around 1:1 (coco - perlite/clay pebbles).
Using the Autopot XL System Kits
Kits will need assembling differently depending on the number of pots. This is actually quite a simple process.
Place the circular root control disc at the bottom of the Autopot tray, with metallic side facing up. This will ensure that roots don't grow into the Aquavalve tray and cause blockages that may inhibit the distribution of nutrient. The black marix discs also help to prevent blockages and should be placed in the bottom of your Autopot containers.
Fill the container with your chosen medium and plant out the system. Autopots work best with absorbent mediums with good capillary action. Coco coir is perfect for this, but remember to use coco specific feeds when choosing nutrients. Soil is fine, but heavier grades work best when mixed with up to 50% perlite.
Water your pots from the top down in an external area and allow them to drain fully outside of the Autopot Trays.
Allow 7 – 10 days of top down hand-watering before filling the reservoir.
To check that the Aquavalve is functioning properly, hold it at eye level and take a close look at the yellow silicon which is fitted into the top float. In order for the Aquavalve to function correctly, a tight seal should be formed between this float and the hole that sits underneath it. If it doesn't sit properly over the hole, lift the top float up, remove the yellow silicon and give it a quick clean. When you put it back into position it should form a tight seal.
The Aquavalve should be cleaned after each grow using warm soapy water and a cloth.