315w Philips Master CDM Lamps
315w Philips Master CDM Lamps
These state-of-the art lamps generate a greater level of useable plant light (photosynthetically active radiation) and run with a blinding intensity that's immediately apparent to the naked eye. The lamp is full-spectrum so it will produce the goods in both veg and flower – expect to see increased growth rates, tighter internodes, an improvement in overall vigour and an increase in final weight. It also has an increase in the red spectrum which gives a definate boost during flowering.
- Philips GreenPower 930 Elite Agro CDM Lamp – full spectrum lamp with an increased red spectrum
- Philips MasterColour 942 Daylight CDM Lamp – full spectrum lamp with extra blue light for veg
- Run at blinding intensity that's clearly visable with the naked eye
- Ideal to give your plants a boost during flowering to increase yields
- Highly efficient Philips 930 Agro puts out 1.9 micromole (umol) per watt of electricity
- Highly efficient Philips 942 Daylight puts out 1.7 micromole (umol) per watt of electricity
- Extremely high PAR levels on both lamps
1 x 315w Philips Master CDM Lamp of your choice or both lamps
How the Philips Master CDM Lamps Work:
Colour Spectrum Output Graph of the Philips 930 Agro CDM Lamp:
The 930 Elite Agro lamp used during flower gives them the extra boost of red light which growrs know produce the ultimate yields. Because its full-spectrum, it's also great for the vegetative stages, triggering rapid growth, speeding up turnover times and increasing the overall efficiency of your indoor garden. With a healthy level of blue/white light (at roughly 5000k to 6000k) internodes stay nice and tight, eliminating the issues with stretch that occur when using lighting with narrow, inadequate spectrums. For an extra boost during veg we would recommend using the 315w Philips MasterColour 942 Daylight CDM Lamp alongside this one which offers that little bit extra blue light. Ceramic-discharge metal halide lamps to produce a light spectrum that's much broader than other forms of HID lighting (like standard metal halides and HPS). Its output is more comparable to the light produced by LEP (light emitting plasma) units. LEPs actually have a slightly broader spectrum than the CDM fixture, but they simply do not compare in terms of brightness.
The output colour spectrum of the Philips 942 Daylight CDM Lamp:
The perfect partner to the 315w Philips GreenPower 930 Elite Agro CDM Lamp, the Philips MasterColour 942 Daylight CDM Lamp has that extra blue light meaning internodes stay nice and tight, eliminating the issues with stretch that occur when using lighting with narrow, inadequate spectrums. Ceramic-discharge metal halide lamps to produce a light spectrum that's much broader than other forms of HID lighting (like standard metal halides and HPS). Its output is more comparable to the light produced by LEP (light emitting plasma) units. LEPs actually have a slightly broader spectrum than the CDM fixture, but they simply do not compare in terms of brightness.
The black line in the graph above represents the "McCree Curve", which gives a relative indication of how efficiently a plant uses the different colours in the light spectrum to photosynthesise with.
Using the Philips Master CDM Lamps:
Hold with a clean cloth and screw the lamp into the bulb-holder fitting of your reflector until it will turn no further. It is important that the lamp is screwed very firmly into the holder. Failure to fit the lamp tightly will cause arcing inside the holder between the centre connector and the contact on the lamp. This will melt the solder contact on the lamp and irreparably damage it. Ensure the lamp is completely clean and free of dirt, grease and finger-prints etc. before switching it on.
Warning: When HID lamps are switched on they run extremely hot. As with all high pressure sodium and metal halide bulbs it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.
PLEASE NOTE: The 315w CDM lamps need to be bedded in as follows: on first illumination the lamp needs to be run continuously for a minimum of 15 minutes. This will allow the metals within the lamp to fuse correctly.
FAILURE TO DO THIS WILL RESULT IN LAMP FAILURE!
If the above is not adhered to, lamp warranty claims will be void.
As with all lamps the light output they produce will decrease with use over time. One Stop Grow Shop recommends you replace your lamp regularly to maintain your garden efficiency.