Parabolic Versatile Reflector 95cm - White

0-day delivery
Lots In stock
Delivery within 1-3 working days
  • Consistent light spread
  • Robust, versatile design
  • Supplied with IEC lead for simple connection to ballasts
  • Vented top section to reduce heat build-up
  • Can be kept close to the top of the canopy
  • Highly reflective imperial white powder finish
  • Can be used with both CFLs and HID lamps
  • Medium sized, 95cm diameter for excellent coverage

Parabolic Versatile Reflector 95cm - White

The Parabolic Versatile reflector is a cost effective, adaptable solution to any grow space. The reflector can be hung anywhere and the lamp can be mounted either vertically or horizontally meaning if you should need to move your reflector around the Parabolic Versatile reflector can be adjusted to meet your needs.

How the Parabolic Versatile Reflector 95cm - White Works:

The Parabolic Versatile is a curved reflector that houses your choice of HID lamp via its supplied E40 lamp holder. Unlike most other reflectors, the lamp in this unit can be mounted vertically or horizontally. When mounted vertically the majority of the lamps output is directed sideways towards curved surfaces and reflected back down towards the canopy. This method creates a uniform spread of light. Naturally, an even light spread leads to a more even canopy, adding consistency when growing larger numbers of plants in a given area. Alternatively the lamp can be mounted horizontally for ease of use in a grow room with restricted area making the reflector useable in vitually any space.
These effects are all enhanced greatly by the white powder finish and also features vents around the lamp holder, when mounted vertically to allow heat to escape through the top of the reflector.

The Parabolic Versatile reflector is supplied with a 375cm power cable with an IEC (kettle lead) connection. The IEC adapter is used to connect to a ballast of a suitable output for the lamp fitted to the reflector.

Footprint of Parabolic Reflector with Lamp in Vertical Position (600w Lamp, 1.5m Square Area):


Footprint of Parabolic Reflector with Lamp in Horizontal Position (600w Lamp, 1.5m Square Area):

To see our full Reflectors range, click here


8 x reflector leaf panels
1 x bag of assorted nuts bolts and washers
1 x E40 lamp holder
1 x top plate

Diameter: 95cm (37.4")
Height: 27cm (10.6")

Recommended lamp for use with this reflector: Sylvania Grolux 600W HPS

How to Use the Parabolic Versatile Reflector:

To assemble the Parabolic reflector, lay the top plate on a large flat surface so that the vents are facing downwards. The leaves can then be fitted over the outer edge of the plate, one at a time. Note that each leaf should overlap the previous leaf as you secure the 'M4' nuts, bolts and washers in place. Gently bend the reflector leaves if necessary to enable the nuts and bolts to be fitted easily. Repeat the process until the reflector is complete. Once done, turn the reflector over and use the 4 sets of 'M5' nuts and bolts to secure the E40 lamp holder in the horizontal or vertical mounting position.

The Parabolic Reflector is designed for use with any vertically or horizontally mounted HPS or MH lamp. Simply hang the reflector over the centre of the grow-space at an appropriate height using easy rolls, jack chains or rope ratchets. Holding your lamp with a clean cloth, insert it into the E40 bulb-holder and screw it in very firmly.

Plug the lead into an appropriate ballast for HPS/MH type bulbs or an IEE (kettle type) mains lead for fluorescent type bulbs and switch on.

Warning: When HID lamps are switched on they run extremely hot. As with all high pressure sodium and metal halide bulbs it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.

Write Your Own Review
You're reviewing:Parabolic Versatile Reflector 95cm - White