Maxibright Daylight CDM Euro Reflector

Lots In stock
Delivery within 1-3 working days
  • The most cost-effective CDM reflector out there
  • Resized to perfectly match a 315w CDM lamp
  • Tried and tested design - gets the job done
  • Features a better build quality than cheaper, knock-off Euro Reflectors
  • Built with a CDM socket to house your CDM lamp
  • Hammertone finish for even reflectivity
  • Can be opened up by bending the reflector panels for a customisable spread

A Customised Euro Reflector That's Been Redesigned for CDM Lamps

The Daylight Euro Reflector from Maxibright takes the classic, tried and tested Euro Reflector concept and tweaks it for CDM lamps. This is a great little reflector for those looking to enter the world of ceramic discharge metal halide lighting.

How the CDM Euro Works:

The Daylight CDM Euro is an entry-level reflector that's based on the ever-popular Euro Reflector. Euros are customer favourites for a good reason - they may come in at a low price, but they still deliver fantastic results! When you're ready to push things further, you can look at upgrading to a Daylight Focus (standalone) or a Daylight Horizon (supplementary), to gain some extra weight from your harvest.

Contains:

1 x CDM Euro with 5 metre cable terminating with male IEC connector

Dimensions: 36cm x 27cm x 11.5cm

Using the CDM Euro:

Hang the reflector over the centre of the grow-space at an appropriate height using easy rolls, rope ratchet hangers or jack chain and fit your 315w CDM lamp. Make sure that the lamp is clean and completely free of fingerprints and other contaminants. Make sure that your reflector is hung at the correct height. You can then connect a CDM ballast to your reflector cable, such as the Maxibright Daylight. You're most likely going to need to need to run your ballast through a contactor and timer. Find out more about contactors and timers here.

315w CDM lamps need to be bedded in as follows: on first illumination the lamp needs to be run continuously for a minimum of 15 minutes. This will allow the metals within the lamp to fuse correctly. 

FAILURE TO DO THIS WILL RESULT IN LAMP FAILURE! 

If the above is not adhered to, lamp warranty claims will be void.

Warning: When CDM lamps are switched on they run extremely hot. As with all HID lamps it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular, avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosio

Write Your Own Review
You're reviewing:Maxibright Daylight CDM Euro Reflector