Mains Cable 2m - Moulded 5 Amp Plug to Female IEC Plug
- 2 metres long
- Moulded mains plug with 5 Amp fuse
- Provides power to an IEC (kettle-type) plug
- Fits the socket on some KSA fans
A 2 metre long mains cable for feeding an IEC plug (kettle type) such as those found on ballasts, reflectors, some fans and various other types of electrical equipment.
The 2 metre long mains cable with moulded 5 Amp Plug and Female IEC Plug transfers mains power from a 13 Amp mains socket to a device with an IEC male inlet. This type of lead is commonly referred to as a kettle lead although this particular version should not be used for this as most kettles require more than 5 Amps and would cause this lead to be overloaded. This type of lead has a variety of uses such as providing power to a ballast or various types of electrical equipment up to 1150 Watts. This lead can also be used to provide power to a reflector when using a Compact Fluorescent Lamp which runs directly from the mains. However, it should never be used to provide mains directly to a HPS or MH lamp as these require their power to come from a suitable ballast. Plugging any type of HID lamp directly to the mains may cause fire, explosion, damage or risk of electric shock.
1 x Mains Cable 2m - Moulded 5 Amp Plug to Female IEC Socket
Plug the IEC female end firmly into the piece of apparatus requiring mains power. Plug the mains socket into a convenient 13 Amp socket outlet and switch on. Always run the cable as safely as possible to avoid a trip hazard and possible accidental disconnection.