How to Use Micro Base #1 Mush
Before using Genesis Micro Base #1 Mush, it must first be re-hydrated. Simply add hot water to the bottle until it is 3/4 (three-quarters) full. Put the top back on and using gloves, shake the bottle vigorously until all the mush has been completely mixed. After thorough mixing, top the bottle up to full with water. Always shake the bottle well before each use.
Genesis Micro-Base is for use with Genesis Grow during the vegetative cycle and with Genesis Bloom during the flowering cycle when growing plants hydroponically..
Always shake the bottle well before use. Use the Genesis feeding schedule for the amounts to use. The exact dosages will depend somewhat on the size, hunger and health of the plants. As you gain experience with these products you may wish to experiment with the ratios of the parts and strengths of your feeds to produce your own feeding schedule which suits your personal preferences. As a guideline, fill your reservoir or feed-water container with fresh water and add equal parts of Genesis Micro-Base and Genesis Grow or Bloom at a rate of 1.5 - 4ml/litre of each and mix well. Add any other boosters that you wish to use and check and adjust the pH as necessary. Nutrient solutions should be replaced once per week.
As with all nutrients, boosters and additives, never mix them together in their concentrated form (i.e. straight out of the bottle). Always add each nutrient, booster or additive to your reservoir or feed water in turn, giving the solution a good stir to mix it in before adding the next one.
Genesis Micro-Base Mush dosage (after re-hydration) : 1.5 - 4ml/litre
Genesis nutrient recommended pH Range: 5.5 - 6.3
Genesis Micro-Base Mush NPK (after re-hydration): 1.5 - 1.7 - 6.2