Connects to the Gavita Master Controller, Giving You a Stack of Extra Features
The 600e is an E-Series compatible version of the ever-popular 600w HPS Pro Fixture. With the inclusion of an RJ 14 socket, you can connect it to a Gavita Master Controller and experience the benefits of centrally controlled lighting – no more contactors and timers, and a ton of new features! Even without a Master Controller, the 600e offers additional functionality over the standard model, running at output levels of 300w, 400w, 500w, 600w or 660w – allowing you to tailor lighting to your environmental conditions.
How the Gavita Pro 600e Grow Light Works:
The output colour spectrum of this grow light:
Gavita Pro 600 Watt HPS Output Colour Spectrum
The black line in the graph above represents the "McCree Curve", which gives a relative indication of how efficiently a plant uses the different colours in the light spectrum to photosynthesise with.
For more information about the above graph check out our blog
The 600e is a Master Controller compatible version of the classic 600w Gavita Pro. Unlike the original model, the 600e comes with 300w, 400w, 500w, 600w and 660w output settings, as well as an 'ext' setting for when you want to use it with your Master Controller. Connecting to the Master Controller itself has been made as quick and easy as possible, and is effectively 'plug and play'. You can then take advantage of the Master Controller's range of features.
400 Volt HPS Pro lamps are more efficient than standard HPS lamps. Both consume the same power and therefore cost exactly the same to run, but Pro lamps run at a higher voltage and a lower current. 400 Volt Pro HPS lamps produce more light for the same power consumption and will give at least 10% higher yield compared to even the best standard HPS systems. In fact, when they are seen side-by-side, the HPS Pro lamps are noticeably brighter, run cooler and the light they produce is slightly whiter. So in addition to them giving a higher yield, plants grown under a 400 Volt Pro HPS are healthier, happier and are at less risk of heat damage, too.
UK mains power (230 Volts) is fed to the ballast via a standard mains lead. The specialised ballast then converts the mains electricity to drive the 400 Volt / 600 Watt lamp. The distance from the ballast to the lamp is very short, meaning that virtually no power is lost through the connecting cable, while eliminating the risk of electromagnetic interference. The reflector has been especially designed to give a superbly even light spread despite its small size. The surface of the reflector has one of the best coatings available and gives at least 95% reflectivity.
400 Volt / 600 Watt lamps maintain their efficiency and light output for much longer than standard HPS lamps. In fact they will normally last at least a year before they need to be changed out. It should be noted that normal HPS lamps and 400 Volt Pro HPS lamps are NOT interchangeable with different ballasts. Standard HPS lamps should only be used with standard or digital 230 Volt ballasts. 400 Volt Pro HPS lamps should only be used in lighting systems with a 400 Volt Pro HPS ballast like with this Gavita product. 400 Volt Pro HPS lamps can be identified by the HPS EL marking on them.
To see our full 400v Pro Ultra High Frequency Kits range, click here