How to Use the Dimlux Extreme Ballast:
Although the Dimlux Extreme Ballast runs fairly cool in use, it should still be located on a flat, firm, surface (not carpet) and in a well-ventilated location. The ballast has built-in fixtures so that it can be mounted to a wall. It should never be covered and there should be no combustible items in the vicinity, just in case. Connect the input lead of your reflector to the output lead of the ballast ensuring the cable is not pulled tight and does not come into contact with anything hot (e.g. lamp, reflector, ballast). Ensure your lamp is tightly screwed into the bulb-holder and that your reflector is at the correct height.
If you’re using this ballast in conjunction with a Maxi Controller, you can power it directly from a mains socket or use one of the following power distribution units:
Green Power 4-Way Powerbox
Green Power 6-Way Powerbox
Green Power 8-Way Powerbox
If you’re not using a Maxi Controller to regulate on/off times, you’ll need to use this ballast in conjunction with a suitable contactor / timer.
Please see the link below for a copy of the Dimlux warranty.