Need Some help with Hydroponics? 01782 749955

Shopping Basket

0 item(s)
£0.00

KSA Acoustic Box Fan 4-Inch (100mm) 400 m3/hr


121000
 

£119.95

Out-of-stock

KSA Acoustic Box Fan 4-Inch 100mm (400 m3/hr)

KSA Acoustic Box Fans are powerful yet compact and particularly quiet for the amount of air that they move. Great for reducing the noise of your extraction system or for keeping the air-flow high when using small diameter ducting.

  • KSA fans – quiet, powerful and efficient
  • Removes stale air from your grow-space
  • Can be used to supply fresh air to your grow-space
  • Can be used with 100mm ducting, carbon filters, airsocks etc.
  • 4-inch (100mm) fan - ideal for small grow-spaces
  • Powerful – huge air-flow for it’s size – 400 m3/hour
  • Quiet – only 36.1 dB
  • Maintenance-free and highly reliable

The KSA Acoustic Box Fan 4-Inch (100mm) 400 m3/hr Contains:

1 x KSA Acoustic Box Fan 4-Inch (100mm) 400 m3/hr

How the KSA Acoustic Box Fan 4-Inch (100mm) 400 m3/hr Works:

The KSA 4-inch (100mm) Acoustic Box Fan is a high quality intake/outlet fan for extracting old, stale air from your grow-space or for supplying it with fresh air. The fans are housed in a lightweight and strong aluzinc casing with external ports for easy connection to ducting, filters, airsocks or other 4-inch (100mm) diameter accessories. The fan itself is a “squirrel cage” type with the intake and outlet being adjacent sides rather than opposing sides. Acoustic insulation is used internally to keep noise to a minimum. The fan can be powered directly from the mains or via a fan-speed controller (not included) to control the fan-speed and air-flow. KSA Acoustic Box Fans are very well-made and during use they are very quiet for the amount of air flow that they produce.

Using the KSA Acoustic Box Fan 4-Inch (100mm) 400 m3/hr

The 4-inch (100mm) KSA Acoustic Box Fan can be used to draw air out of your grow-space via a 4-inch (100mm) carbon filter or just 4-inch (100mm) ducting. Insulated ducting is highly recommended where noise is to be kept as low as possible. Inlet and outlet ducting should be attached to the vents with Duct Clips (not included). The KSA Acoustic box fan can be floor-mounted or mounted to a surface in any position with the supplied bracket. KSA Acoustic Box Fans come pre-wired with a short length of mains cable terminated in an IEC plug. This can either be connected directly to the mains or fed from a Fan Speed Controller via an IEC mains cable. We recommend the use of a circuit-board type fan speed controller such as one of the excellent SMSCOM products for use with KSA Acoustic Box Fans rather than coil-type controllers which may cause resonance.

Do not under any circumstances put your fingers into the spinning blades of a fan, especially an in-line type. Even a small fan has enough power to cause severe injury and loss of fingers. Just don’t do it, no matter how tempted you are. Keep ducting runs as short as possible as every metre of ducting reduces the flow-rate that the fan can achieve. The more ducting attached, the lower the air-flow. Bear in mind that a carbon filter will reduce the air-flow that your fan can achieve by about 25% just on it’s own. When turning a corner with ducting try to create a swept bend rather than a sharp knee as this will reduce air-flow by the least amount and also help to keep wind-noise down. To further keep wind-noise down to a minimum, stretch flexi-ducting out as much as possible or use acoustic ducting.

KSA Acoustic Box Fan 4-inch (100mm) 400 m3/hr rated air-flow: 400 m3/hour

KSA Acoustic Box Fan 4-inch (100mm) 400 m3/hr noise level: 36.1 dB

KSA Acoustic Box Fan 4-inch (100mm) 400 m3/hr power consumption: 115 Watts

KSA Acoustic Box Fan 4-inch (100mm) 400 m3/hr current draw: 0.51 Amps

KSA Acoustic Box Fan 4-inch (100mm) 400 m3/hr dimensions: 310 x 308 x 184 mm

KSA Acoustic Box Fan 4-inch (100mm) 400 m3/hr weight: 4.22 Kg

KSA

Size

  • 4-Inch (100mm)
  • 400

Stage

Method

Material